i need some help with this thing

[Guest]

thanks all I have made me a NES...ish controller port

I took the one that was in it riped off the bord pulled out the unneeded pins bent the remaining so they would fit into a NES controller and sodered the wires leading to the motherbord directley to the correct pins
as pictured below

Thanks all for your wonderfull help

NOW I need more help I hope im not being to much of a pest but

3 more questions
1.what do I need to make sound come out of the speaker louder

2. how the hell do I connect a screen to this thing

3. where can I get a alright screen for a fair prise

[Sparkfist]

Increase the volume throught a speaker is do by changing the resistence of the signal going through. A potentiameter is what is used.

Connecting the NOAC to a screen just means your doing the same as you would with a tv, put composit out from the board to the screens video input.

www.ebay.com would be the best place to loook for a cheap portable tv or LCD screen,

[gannon]

umm....I think he wants to increase the sound as in building a small amp for it....

[Guest]

I dont relly know what those mean but I just want sound to come out louder than it dose if you connect a speaker directley to the sound output and maybe volume controll would be nice

[peppers]

is rely is a noac I had some dout in the back of my mind at first

I don’t have a pin converter yet so I decided to carefully open gyromite and put its Famicom board into the devise if I screwed it up I knew ROBbie would be mad at me but it worked fine

you dont want to mess with ROBbie unless you want a gyro upside the head