whyyyyyyyy?

*o* · Post by ***o*** » Wed May 11, 2005 3:28 pm

have you checked the voltage to the screen have you checked if you mixed up the leads

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed May 11, 2005 3:57 pm

*o* wrote:have you checked the voltage to the screen have you checked if you mixed up the leads

the long ones are positive right

okay i've tried the calculator and it says something about milliamps wat should i put there

forget everything i have been a stupid lazxy nerd and am tired of troubling everyone i will go with wat POD says and use a 22 ohm and try again once i get more leds thanks for everyones patience towards me

Radon199 · Post by **Radon199** » Sun May 15, 2005 9:21 pm

Might wanna try this site if your useing a PSOne screen.

http://www.extremetech.com/article2/0,1 ... 353,00.asp

Not sure if this is Ben's book or not, I never got it and I'm basicly doing my PSOnep off the top of my head (I've never soldered before or used a Dremel tool... fun) Anyways this is what i'm gonna use when I mod my screen in the next few days.

nos_slived · Post by **nos_slived** » Mon May 16, 2005 12:54 am

The "By Benjamin Heckendorn" under the title leads me to believe that it is Ben's book

. Any objections?

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Mon May 16, 2005 7:26 pm

Radon199 wrote: (I've never soldered before or used a Dremel tool... fun) Anyways this is what i'm gonna use when I mod my screen in the next few days.

i'd practice soldering first because i had no idea how to solder and it took me like an hour to do my first led mod now i can get through pretty quickly but they keep burning out

i still trhink it was the resistor so i picked up the one recommended on POD

i should get my new leds tommorrow or soon