question about Family Converter 60-72 Pin

Peppers1 · Post by **Peppers1** » Mon Nov 22, 2004 9:20 pm

I parchased some Family Converter 60-72 Pin from lik-sang

im not 100% shure witch way they do so I have two questions

1.is the diagram I made below connect in the way to insert the cart/adapter into my noac?(it isn't)

2. will my cartridge or noac be damaged if I put it in wrong?

edit:
adapter: the words "Family converter 60-72 pins" face down

cart: gos lable side up

cennar · Post by **cennar** » Mon Nov 22, 2004 11:07 pm

ok since the converter just skips 4 pins or so in the middle just worrie about getting that cartrage facing the right way most noacs have the pins written on them nummbered 1-30 and 31-60 the cart sould face towards the 1-30

Guest · Post by **Guest** » Mon Nov 22, 2004 11:51 pm

the pins on myne are not labled but when I put in the bord from inside gyromite I but it in with the side that was faceing the sticker up and it worked in my drawing I assumed that famicom bords face the same way in the cart as that one did

peppers1 · Post by **peppers1** » Mon Nov 22, 2004 11:57 pm

I would not mind trying both ways if someone knows it wont damage my cart so would it?

cennar · Post by **cennar** » Tue Nov 23, 2004 12:55 am

i dont think it would

peppers1 · Post by **peppers1** » Tue Nov 23, 2004 1:00 am

thanks for your help but have you tryed it?

cennar · Post by **cennar** » Tue Nov 23, 2004 1:28 am

yeah i need anohter screen and i would have an other working portable..
screen or gba AV in

diggerdanh · Post by **diggerdanh** » Tue Nov 23, 2004 6:56 am

I have tried it both ways, it won't harm anything. If you have it backwards, it just displays nothing on the screen.

peppers · Post by **peppers** » Tue Nov 23, 2004 11:56 am

sweet thanks

Post by **Sparkfist** » Mon Dec 20, 2004 7:13 pm

Hey sence I got my stuff form Gannon finally (thanks again), I was courious about how to make sure the NES works. I tested it with two carts I had handy and the most I got out of them were a colored screen, and this is just one color like instead of black its a dark maroon. Any help would be great.

SgtBowhack · Post by **SgtBowhack** » Mon Dec 20, 2004 7:22 pm

If I remember correctly, it so happens that the Famicom cart and the NES cart have roughly the same shape, but the size and side the label is on are different. What that means is, you'd want the NES cart to have the label facing the opposite way from what a normal Famicom cart would be. Or am I totally off-base here? It's been a long time since I've messed with this stuff.

peppers · Post by **peppers** » Mon Dec 20, 2004 11:23 pm

btw: that little drawing above is wrong

could you erace it for me gannon, the hole post pls so noone get confused

you could replace it with this one that would be ok also

it relly gos

adapter: the words "Family converter 60-72 pins" face down

cart: gos lable side up

someone · Post by **someone** » Tue Dec 21, 2004 2:26 pm

just look at the missing pins on the nes cart and the pins that the adapter removes, there are an uneven number of pins on each side of the missing pin, and for telling which side goes up, see where the ground on the nes cart is and the ground on the slot on the NOAC!

JackFrost22 · Post by **JackFrost22** » Tue Dec 21, 2004 5:17 pm

i noticed that when desiogning it