noac power questions

peppers · Post by **peppers** » Thu Oct 28, 2004 5:16 pm

Ok first of all I dont relly know much about hardware and power suplys
so bear with my compleate stupidity but here gos

the adapter for it output says "DC 9v 500mA" I have a rechargable battery that says "6.OV RECHARGEABLE NiCd Battery Pack" I connected it to my noac it seems to power it fine but I figured I would ask people that know about it so any input would be nice ,thanks in advance

Post by **gannon** » Thu Oct 28, 2004 5:46 pm

All noac's that I've encountered so far only require 6V. I find that odd since they seem to have just a standard 7805 on board.

Post by **Gamelver** » Thu Oct 28, 2004 6:34 pm

have you checked to see if the 6 volts goes straight to the 7805? maybe it goes somewhere else before going to the 7805. maybe it goes to a different dimension, converts to 7.2v or higher, and then goes into the 7805

!!!!!!........or not

Guest · Post by **Guest** » Thu Oct 28, 2004 10:30 pm

it dose have 5 capacitors maybe it uses tose to get its voltage up if it reqires more

peppers · Post by **peppers** » Thu Oct 28, 2004 10:33 pm

thanks, I guess I have nothing to worry about

, and that was me^ btw

scherzo · Post by **scherzo** » Fri Oct 29, 2004 6:19 am

Do I need to do anything special in terms of power if I want to use a PSOne screen with a NOAC?

Post by **gannon** » Fri Oct 29, 2004 9:52 am

no, the battery to power the psone screen won't damage the noac.