PSone multi-port

[AdumUp]

So board located in the bottom part of the PSone LCD's case, the thing that has the headphone jack, AV out and charge port. I was curious if anyone had a diagram or something else that would show me how to slice that thing up, And if i were to chop it up would i have to wire the pieces back together?

Another question!
How do i build a low battery indicator light? i was having trouble finding the answer here, probably just overlooked it (i went through about 10 pages and gave up)

[Bush]

Not sure about the first question, but if you are using 7.4v, daftmike has made a diagram for that: http://forums.modretro.com/viewtopic.php?f=7&t=255" onclick="window.open(this.href);return false; . If thats too complicated, you can buy battery PCB's that have "gas gauge ports". Those allow you to plug in an LED gauge that will tell you how much battery you have left. There are some here: http://www.all-battery.com/protectivepc ... packs.aspx" onclick="window.open(this.href);return false; (NOTE: the 7.2v pcb's are also rated for 7.4v.) Hope this helps! Im assuming this is for your n64p?

[gamax92]

For the two ports question
http://kyorune.com/modding/file.php?art=17&file=3" onclick="window.open(this.href);return false;

EDIT: This may help http://kyorune.com/modding/article.php?id=17" onclick="window.open(this.href);return false;