Have an idea for a project, need some help

Do you have a technical question that doesn't really fit a specific console? Want some general info on electronics, hacking, making cookies, etc? Here's the place to ask! Go nuts.

Moderator: Moderators

Post Reply
thecriscoking
Posts: 6
Joined: Thu Oct 15, 2009 9:03 am

Have an idea for a project, need some help

Post by thecriscoking »

My idea for an upcoming project was to make a portable emulator. One i could upload games onto, it would not need that big of an HDD but essentially, i do not even know where to begin. If I'm not mistaken, you would need an emulator board? This device could (maybe in the future) play more than just one system of ROMs (i.e. SNES, NES, GBA). If this has been made before could someone point me into the right direction on how to start constructing this? I've been looking all over the intertubes and have accumulated nothing.

Thank you in advanced.

EDIT: Also, i'm trying to stay away from purchasing something and/or then hacking/modding something.
argelfraster
Posts: 984
Joined: Sun Sep 07, 2008 3:14 pm
Contact:

Re: Have an idea for a project, need some help

Post by argelfraster »

thecriscoking wrote:I'm trying to stay away from purchasing something and/or then hacking/modding something.
You came to the wrong place muchacho.
thecriscoking
Posts: 6
Joined: Thu Oct 15, 2009 9:03 am

Re: Have an idea for a project, need some help

Post by thecriscoking »

argelfraster wrote:You came to the wrong place muchacho.
I simply mean I would like to build something from scratch, and yes, i know it will be more difficult. People are always just saying, "buy a psp and add homebrew" or "mod a ds".
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Re: Have an idea for a project, need some help

Post by vskid »

Image
thecriscoking
Posts: 6
Joined: Thu Oct 15, 2009 9:03 am

Re: Have an idea for a project, need some help

Post by thecriscoking »

Yeah I've seen those before and that's what i meant by prebuilt. I was hoping i could construct something from scratch. I've seen it done before but no tutorial and not much of a description.

I'll post the article....

http://hackaday.com/2009/10/12/emulator ... tory-made/" onclick="window.open(this.href);return false;
chainfire95
Posts: 423
Joined: Thu Jul 30, 2009 11:13 am
Location: Minnesota

Re: Have an idea for a project, need some help

Post by chainfire95 »

You obviously have no idea what you're talking about then. Considering thats a prebuilt emulator stuffed in an NES case.
A truly wise man can entertain a thought without accepting it. A fool cannot withhold past judgments but instead closes his mine to new possibilities. Someone who wants to innovate simply needs to forget what everyone says isn't possible.
thewizdawg
Posts: 120
Joined: Thu Dec 18, 2008 7:05 pm
Location: O-Hi-0

Re: Have an idea for a project, need some help

Post by thewizdawg »

How much money do you want to spend and how much do you know about hardware/linux??

I had similiar thoughts using gumstix products. Check them out at http://www.gumstix.com" onclick="window.open(this.href);return false;.

However if you don't know where to begin you might have a hard gettin' er done. Start simple.
thecriscoking
Posts: 6
Joined: Thu Oct 15, 2009 9:03 am

Re: Have an idea for a project, need some help

Post by thecriscoking »

chainfire95 wrote:You obviously have no idea what you're talking about then. Considering thats a prebuilt emulator stuffed in an NES case.
I wasn't aware. I must have misread the description...
thewizdawg wrote:How much money do you want to spend and how much do you know about hardware/linux??

I had similiar thoughts using gumstix products. Check them out at http://www.gumstix.com" onclick="window.open(this.href);return false;.

However if you don't know where to begin you might have a hard gettin' er done. Start simple.
I know quite a bit about linux, but a lot about hardware, but i'm no noob.
snowpenguin
Posts: 1306
Joined: Thu Jun 11, 2009 4:10 pm

Re: Have an idea for a project, need some help

Post by snowpenguin »

chainfire95 wrote:You obviously have no idea what you're talking about then. Considering thats a prebuilt emulator stuffed in an NES case.
You obviously have no idea what you're talking about then. That's an MP3 player in an NES cartridge case.
Image
chainfire95
Posts: 423
Joined: Thu Jul 30, 2009 11:13 am
Location: Minnesota

Re: Have an idea for a project, need some help

Post by chainfire95 »

http://www.youtube.com/watch?v=hELTtsBR ... r_embedded#" onclick="window.open(this.href);return false;
A truly wise man can entertain a thought without accepting it. A fool cannot withhold past judgments but instead closes his mine to new possibilities. Someone who wants to innovate simply needs to forget what everyone says isn't possible.
thecriscoking
Posts: 6
Joined: Thu Oct 15, 2009 9:03 am

Re: Have an idea for a project, need some help

Post by thecriscoking »

thewizdawg wrote:How much money do you want to spend and how much do you know about hardware/linux??

I had similiar thoughts using gumstix products. Check them out at http://www.gumstix.com" onclick="window.open(this.href);return false;.

However if you don't know where to begin you might have a hard gettin' er done. Start simple.
now a question i have is, how can i embed an emulator onto one of the products from gumstix.


EDIT:
I learned I can cross compile the source code of a SNES emulator onto an embedded system.
bicostp
Moderator
Posts: 10491
Joined: Mon Mar 07, 2005 5:47 pm
Steam ID: bicostp
Location: Spamalot
Contact:

Re: Have an idea for a project, need some help

Post by bicostp »

They're just regular TI ARM Cortex processors.

EDIT: Moving to the tech Q&A forum.
thecriscoking
Posts: 6
Joined: Thu Oct 15, 2009 9:03 am

Re: Have an idea for a project, need some help

Post by thecriscoking »

bicostp wrote:They're just regular TI ARM Cortex processors.
So what does that mean for me? Do I need to find the same type?
Post Reply