I have 3 GBA SP mobos lying around. 2 of them stopped working during modding, and 1 just came broken. 2 of them just wont turn on, and the charger only gives 1 charge LED flash. The other one will not turn on, but charges batterys fine.
From my experiences with DS lites, I would bet that it is a fuse that blew. However, I cannot find ANY info on where they might be (Or documentation of the GBA SP mobo in general). Any help with where the fuses are, or how to find them?
GBA SP fuses?
Moderator: Moderators
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
GBA SP fuses?

Excellent
Fuses are marked with F1, F2 and so on. After 30 seconds of looking or so I could find only one fuse on my SP mobo, situated south east of the A button, near the cut out corner.
Edit: When looking for fuses in general, you're likely to find them near the PSU. On an SP, the whole south east part of the board (Looking from above) is dedicated to the PSU. (And the PSU is generally close to the battery connectors)
Edit: When looking for fuses in general, you're likely to find them near the PSU. On an SP, the whole south east part of the board (Looking from above) is dedicated to the PSU. (And the PSU is generally close to the battery connectors)
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies