its done BUT

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
Djsefnet
Posts: 82
Joined: Tue Nov 30, 2004 4:20 am
PSN Username: Djsefnet
Location: California

its done BUT

Post by Djsefnet »

well its all wired up and can get sound, controller, werking but the backlight is on but u cant see any game at all. i tried several games to see if it was somthing there but no go. when you first turn it on the screen gets bright enouh to seem like it would show the video, but then the leds go dimmer and u can hear the game but not see any video. brightness and vol bars u can see fine ...
any help pls? so close to being done with this :x
Fire in the hole
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

video on the wrong pin
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

Image
Djsefnet
Posts: 82
Joined: Tue Nov 30, 2004 4:20 am
PSN Username: Djsefnet
Location: California

Post by Djsefnet »

so that is the bottom of the psones board correct? if so does it matter what side i use either left or right? or do i have to use both sides one for video and the other for audio looks like? i was just using the mini board that those wires connected to..and to keep it simple i just cut apart the wire i had tof my snes mini port and used that end to connect to the snes and put those ends to the mini board on the psone. thx for the pic was realy what i needed :D
Fire in the hole
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

that got a little confusing but I think its all right :?
Post Reply