Final couple of questions regarding my psp.

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Psy
Posts: 48
Joined: Thu Jul 29, 2004 6:12 pm
Location: Middlesbrough, UK

Final couple of questions regarding my psp.

Post by Psy »

Hi again,

Last two questions for the experts:

1) I have a 4Gamers 5.4 inch 12V screen to use in my PSone, i'm currently using a 7.2V RC battery to power the PSone but obviously this has some problems trying to run the screen as well. Is there anyway I can put another 5V in there to make up the difference in power requirements without having to just get a 12V battery, and will the PSone be able to take 12V without ending up in silicon heaven?

2) I'm currently ripping up a load of old IDE cables to use as wire for soldering certain connections together, there won't be any problems with using this stuff will there?

Oh sod it, I've got one more question actually.

3) Is there a pinout anywhere for the PSone AV multi out and the controller/controller port?

Thanks in advance,

Psy
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

no problem with IDE and with the gc screen nope your kinda stuck and with the pinouts www.gamesx.com
Psy
Posts: 48
Joined: Thu Jul 29, 2004 6:12 pm
Location: Middlesbrough, UK

Post by Psy »

Thanks for the speedy reply. Guess I'll have to make up a new battery pack then, but will the PSone take 12 volts or will I have to use two seperate battery packs?
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

IDE wire works, but if you get some wire from radio shack that has one big thread it's much easier to solder.
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
goodie
Posts: 824
Joined: Mon Oct 11, 2004 1:02 pm

Post by goodie »

Yeah, the only bad thing about IDE cable is that its a pain to seperate and strip all those little wires.
mnbvcxzlkjhgfdsapoiuytrewq
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

although it can be nice to group them for things like the controller
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
Psy
Posts: 48
Joined: Thu Jul 29, 2004 6:12 pm
Location: Middlesbrough, UK

Post by Psy »

I've got a little diagram of what I think I want to do with this, just need to know if it will work, I can't see why it wouldn't, but some of you genii may tell me different.

Basically I want to attach my 7.2V RC battery in serial with three AA 1.5V batteries, giving a total of 11.7V, with a switch at point "A" to switch between the serial battery setup and the charger for the RC Battery.

Image
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

with that charger setup, you would also be charging the AAs, which you would not want to do if they shouldn't be (and I'd be careful even then, since they may wear out pretty quickly or other bad things if not properly charged)
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
Psy
Posts: 48
Joined: Thu Jul 29, 2004 6:12 pm
Location: Middlesbrough, UK

Post by Psy »

If the AA's were removed when the charger was attached would that affect the charging then?
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

no. Acually, you could possibly make the switch disconnect the AAs so you would only need to take them out to replace them.
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
Psy
Posts: 48
Joined: Thu Jul 29, 2004 6:12 pm
Location: Middlesbrough, UK

Post by Psy »

Thats what I had in mind actually, so that has answered my question. Thanks muchly, and have a great christmas if I'm not back on here with more problems before then. Love the sig by the way!
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

which part? :P

hey, I had to end the war somehow (well, no, I didn't, but I wanted to try Linux's image editor and thought that would be a good way to do it :lol: )
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
Psy
Posts: 48
Joined: Thu Jul 29, 2004 6:12 pm
Location: Middlesbrough, UK

Post by Psy »

It was actually the binary part I particularly liked, gotta love tech jokes. Speaking of which, it's been a while since I've read any BOFH, better head on down to theregister to check out the latest episodes.
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

as long as we're on the topic of spongey's sig, what about hexadecimal?[size=0]for those who don't know, 10 in hexadecimal is 16 in decimal :P[/size]
Black Six
Moderator
Posts: 1991
Joined: Sun Apr 04, 2004 4:34 pm
360 GamerTag: Black 5ix
Location: MD

Post by Black Six »

There are only 2 kinds of people in this world, those who understand hexadecimal and those who don't.
Just isn't the same, unless you could get 10(base 10). Then you could have something like:
There are only A kinds of people in this world, those who understand hexadecimal, those who don't, those who don't, those who don't, those who don't, those who don't, those who don't, those who don't, those who don't and those who don't.
And then it's just stupid.
"It's not that life's so short, it's just that you're dead for so long." -Anonymous
Threads Closerized: Lost Track, Whoops
Post Reply