PSOne Screen Problems

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4773
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:
Contact Turbo Tax 1.0

Post by Turbo Tax 1.0 »

please use the edit button :D
when life gives you lemons make flux
Image
snesp mk4
Top
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

Theres a flap/clip thingy where the ribbon goes. Make sure that it is up and that the ribbon is flat. Hope this helps.
Last edited by vskid on Fri Jun 17, 2005 11:28 am, edited 1 time in total.
Image
Top
Dave
Posts: 372
Joined: Wed May 12, 2004 1:53 pm
Location: Neo Kobe City - 2042
Contact:
Contact Dave

Post by Dave »

Pull out this little extension plastic thing on the connector, slide the ribbon cable in then push the extendedplasticback to secure it firmly.
Image
Top
rpetrello
Posts: 22
Joined: Thu Jun 16, 2005 1:45 pm

Hrm

Post by rpetrello »

I can't see any "little exntension plastic thing" - this used to just pop into place, and it doesn't look like anything has broken off of the connector - I've just completely got no clue.

So is the tab on the actual white connecter, or is it on the mobo? Is there one of the front (where the leads are) or two on the sides, or one on the back of it?
Top
Dave
Posts: 372
Joined: Wed May 12, 2004 1:53 pm
Location: Neo Kobe City - 2042
Contact:
Contact Dave

Post by Dave »

Alright, it looks like you pop up the brown plastic slide the ribbon in firmly then snap the brown plastic back into place. If it doesnt hold well use some hot glue :) .
Image
Top
Post Reply

Return to “Portable Screen Hacking”