Handheld Gamecube attempt

honey · Post by **honey** » Mon Jun 13, 2005 12:12 pm

thanks, and sorry fpr my bad english.

S q u e e ! · Post by **S q u e e !** » Mon Jun 13, 2005 12:15 pm

No prob. We all remember Kai...

honey · Post by **honey** » Mon Jun 13, 2005 12:43 pm

what is the square on your diagram there goes inside the res and the blue wire? is this the gc mobo?
where is the 2 (+) and 2 (-) have you an pick?

and the tv (-) ground, wire to the batteries (-)?

have you use the psone screen with the led mod or without?

i will buy 2 for this http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... 51586&rd=1, but they have 2200 mah, is tis a prob.?

S q u e e ! · Post by **S q u e e !** » Mon Jun 13, 2005 3:07 pm

honey wrote:what is the square on your diagram there goes inside the res and the blue wire? is this the gc mobo?

No, it is the DC AUX input Jack.

I wrote:The block at the bottom is a DC AUX input jack which is Radio Shack #274-246

honey confusingly wrote:where is the 2 (+) and 2 (-) have you an pick?

Huh?

honey also wrote:and the tv (-) ground, wire to the batteries (-)?

No, just solder it to the ground on the GC

Then honey wrote:have you use the psone screen with the led mod or without?

With. Without the mod, the screen sucks up too much power.

After that, honey wrote:i will buy 2 for this http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... 51586&rd=1, but they have 2200 mah, is tis a prob.?

Actually, those are a little better, so go ahead.

honey · Post by **honey** » Mon Jun 13, 2005 11:37 pm

no i mean the square in the middle of the picture, sorry?

the power jack was on right bottom side?

in the left bottom side was the gc power supply?

can you give me pictures from your gcp batterie and wire circus? please

honey · Post by **honey** » Tue Jun 14, 2005 11:10 am

i have put it on your picture what i mean

Unidentified Assilant · Tue Jun 14, 2005 11:24 am

wow, this thread is old... a PSone screen accepts composite does it not?

S q u e e ! · Post by **S q u e e !** » Tue Jun 14, 2005 3:21 pm

Yes and the GC puts out composite video.

@ honey: I have said now three times, that is a DC aux input jack. Look in the previous posts.

honey · Post by **honey** » Wed Jun 15, 2005 12:11 am

i have found this on radio shack is this the correct one?

and can you give me an picture from your wireing on the gc and your other opponents? please

i will see the points iam must wire.

i have all my opponents found.

i will use. a psone screen with led mod and two from this

one of this have 7,5V with 2000 mAh, its from the psone.

nos_slived · Post by **nos_slived** » Wed Jun 15, 2005 12:28 am

Are you using an online translation service?

honey · Post by **honey** » Wed Jun 15, 2005 12:44 am

no.

i know thats my english is very bad, sorry

i do my best, and i hope in future is better.

or I can ask also on German?

you understand german?

nos_slived · Post by **nos_slived** » Wed Jun 15, 2005 12:58 am

I'd probably understand German better than opponents. I think the word you wanted was components. Don't worry, keep trying and your English will improve(it's already better than a lot of the members here).

vb_master · Post by **vb_master** » Wed Jun 15, 2005 7:20 am

nos_slived wrote:(it's already better than a lot of the members here).

No... really?

S q u e e ! · Post by **S q u e e !** » Wed Jun 15, 2005 10:10 am

honey wrote:i have found this on radio shack is this the correct one?

Yes it is.

Then honey wrote:and can you give me an picture from your wireing on the gc and your other opponents? please

i will see the points iam must wire.

That diagram is exactly how I have this wired. And seeing is that and the reset button are the only things that are wired...

After That, honey wrote:i have all my opponents found.

i will use. a psone screen with led mod and two from this

one of this have 7,5V with 2000 mAh, its from the psone.

Good. Just hook it up like in the diagram, and hook up the PSone like the diagram I will post in just a few minutes.

EDIT: Here it is.

Here is a rough diagram as to where the pins are. Be aware that these are just markers.

And here is Here is a diagram to tell you from on the PSone screen, where to connect the A/V, 7.5v in, and ground.

remeber to connect the ground pins on the PSone screen I've identified together, along with the ground pins on the GC.

honey · Post by **honey** » Wed Jun 15, 2005 11:49 pm

have all Dc aux Input Jacks 2(+) and 2 (-)? I have not see a dc aux input Jack befor, sorry

me is only unclearly which with six cables is?