verge 5.4 inch gamecube screen

madc0w · Post by **madc0w** » Sun May 08, 2005 1:07 pm

does anyone know how to decrease the power usage??? i have no idea what the backlight is, but i can't take it apart because i stripped a screw trying to open it

daguuy · Post by **daguuy** » Sun May 08, 2005 8:41 pm

madc0w wrote:i stripped a screw trying to open it

use a melted pen tip to open it just like nintendo screws

MiGs · Post by **MiGs** » Sun May 08, 2005 10:48 pm

If your gonna try the melted pen thing, use a pen with hard plastic, but for just a stripped screw, go ahead and drill it out or something.

nos_slived · Post by **nos_slived** » Sun May 08, 2005 11:40 pm

Heat it up with a solder pen, melt the plastic around it, pull it out with plyers. VOILA!

*o* · Post by ***o*** » Mon May 09, 2005 5:43 am

dremel around it

Foxx373 · Post by **Foxx373** » Thu May 12, 2005 11:59 am

madc0w: Do you mean you stripped a Screen Screw, or Gamecube Screw? I have the same Verge Gamecube Screen, and im trying to figure out how to lower the power requrements for the screen. If you detach the screen from the base, it uses 7.5V but I havent been able to get the correct amperage. I want to fool arround with it, but i fried the last screen I experimented on.

madc0w · Post by **madc0w** » Thu May 12, 2005 4:11 pm

never mind, i opened it
i think there might be a lightbulb inside, but i don't want to figure it out, because everything is glued down and i don't want to break it

benheck.com Forums

verge 5.4 inch gamecube screen

verge 5.4 inch gamecube screen

Re: verge 5.4 inch gamecube screen