Dreamcast Solder Points

[HungHsiKuan]

Hey guys, I'm new here.
To get right to the point, I was performing the internal VGA mod for the Dreamcast, and I managed to wreck the +5v solder point that is shown in this diagram from mmmonkey.com



Point 5.

No solder will stick to this point anymore, so I was wondering if any of you know of any other points on the board that I could get my +5v supply from.
Images would be most helpful.
Thanks

[qwertymodo]

Your image link is broken, but if there are any traces coming off of that point, you should be able to scrape off the solder mask enough to reveal a new solder point.

[HungHsiKuan]

Your image link is broken, but if there are any traces coming off of that point, you should be able to scrape off the solder mask enough to reveal a new solder point.

Image link should be fixed. And as you will see, the trace is very short, and I managed to ruin that at the same time.

[majora1155]

Looks to me like it goes to the underside of the board. test with a multimeter.