GC error & audio problem

Gannondorf929 · Post by **Gannondorf929** » Tue Jun 07, 2011 7:15 pm

I hardwired the regulator board to the revision a gamecube (using the 4-wires), but when I turn it on, the audio is distorted and it goes to an error screen after a few seconds. Is it shorting out, or is it something else? I removed all of the ports, including the dd, except for the audio/video.

Ashen · Post by **Ashen** » Tue Jun 07, 2011 9:43 pm

If there is no DD hooked up the GC will always get an error on boot.

Gannondorf929 · Post by **Gannondorf929** » Thu Jun 09, 2011 4:31 am

that makes sense, but what about the distorted audio? is that just because 5v isn't supposed to power the sound?

Ashen · Post by **Ashen** » Thu Jun 09, 2011 7:56 am

Most likely. If you're using the original regulator board anyway. Why not just hook the 12v line back up?

Gannondorf929 · Post by **Gannondorf929** » Thu Jun 09, 2011 6:08 pm

Allright, duly noted. Will do

benheck.com Forums

GC error & audio problem

GC error & audio problem

Re: GC error & audio problem

Re: GC error & audio problem

Re: GC error & audio problem

Re: GC error & audio problem