Hey guys;
I have an original DS which needs a paintjob bad. Its petty rough.
Its the red and silver one.
I'm going to use a a flat black spray paint, and then use some clearcoat over it.
Now; I need some help.
1) How many coats of paint should I do?
2) Should I lightly sand the DS first?
3) I have all the tools to take a DS apart, but do to the simple design; would I be able to spray paint it without taking it apart? Or would this be really risky?
4) How far away should I be when spraying?
-HDC
Painting DS
Moderator: Moderators
-
HotDog-Cart
- Portablizer
- Posts: 3804
- Joined: Sat Jul 16, 2005 12:07 pm
- PSN Username: Lythinca
- Steam ID: scythe_king
- Location: Your IP Address, Connecting...
- Contact:
-
HotDog-Cart
- Portablizer
- Posts: 3804
- Joined: Sat Jul 16, 2005 12:07 pm
- PSN Username: Lythinca
- Steam ID: scythe_king
- Location: Your IP Address, Connecting...
- Contact:
Re: Painting DS
Already painted.
I applied a clearcoat around 24 hours ago. Is it safe to do another coat of the clearcoat now? or should I wait the "5 days" it says on the can? (It says wait 5 days OR 1 hour) :S
I applied a clearcoat around 24 hours ago. Is it safe to do another coat of the clearcoat now? or should I wait the "5 days" it says on the can? (It says wait 5 days OR 1 hour) :S

Re: Painting DS
As long as its dry, should be fine.
