Basically, I just want to mod a dead 360 into a PC. I know this has been done before, but who cares. I want to try for myself.
So, here is what I was thinking of for parts:
1.) Dead 360. Preferably RROD.
2.) Mini-ITX AM3 Motherboard
3.) AM3 Processor - Sempron 140, or 145. Preferably an Athlon II 250 or 255
4.) RAM - 2 or 4GB DDR3. 1066MHz to 1600MHz
5.) Optical Drive - Only if the 360's Optical drive cannot be reused. If it can't, a slim drive would be best.
6.) Laptop Hard Drive - If the budget allows a 1.8" SSD would be preferred.
7.) Low end graphics card. - Nvidia is preferred due to CUDA.
8.) Some sort of Power Supply.
That said, I have some concerns.
a.) What will I do for the PSU? I can't use it externally.
b.) Will I need to mount extra fans?
c.) How will I mount the I/O Shield Plate and the Graphics card?
d.) How will I go and mod the ring of light so It will be usable as a power button?
e.) ^ What about the optical drive?
Thoughts/Opinions?
Xbox 360 PC?
Moderator: Moderators
-
BurningSkyline
- Posts: 18
- Joined: Thu Oct 28, 2010 8:14 pm
- 360 GamerTag: BurningSkyline
- Location: Saint Paul Park, MN
-
BurningSkyline
- Posts: 18
- Joined: Thu Oct 28, 2010 8:14 pm
- 360 GamerTag: BurningSkyline
- Location: Saint Paul Park, MN
Re: Xbox 360 PC?
I was thinking I'd need something along the lines of 400w. Is there A way I can use a laptop PSU, though? 120w won't do the job.
-
jdmlight
- Posts: 795
- Joined: Thu Dec 27, 2007 11:17 pm
- Steam ID: jdmlight
- Location: A boring suburb of Chicago.
Xbox 360 PC?
Laptop PSUs are usually a lot less than 120w. You could use more than one picoPSU, just split up the current draw, much like a multiple-rail PSU. Or you could look into having a separate 12v regulator for the graphics card since that's usually the highest current draw item in a typical gaming machine.BurningSkyline wrote:I was thinking I'd need something along the lines of 400w. Is there A way I can use a laptop PSU, though? 120w won't do the job.
The power supply would still be pretty small even if you did use multiple picoPSUs.
Though tbh you should calculate what amperage you really need for each voltage and compare that to what the picoPSU offers. You aren't using super-high-performance parts, 120w appropriately divided across the voltages might be enough.
--John (and please call me John, it's really weird to be called by my username)
Fight MS Paint abominations! If you don't have a camera, go here, and pick something 3 megapixels or higher.
Fight MS Paint abominations! If you don't have a camera, go here, and pick something 3 megapixels or higher.
-
humakabula1
- Posts: 728
- Joined: Sun May 30, 2010 3:11 am
- 360 GamerTag: H1writer
- Location: Diggi Down Under
Re: Xbox 360 PC?
run the xbox from a good quality pc psu.
Wedgix (custom linux distro): 20% complete
