NES DVD: Simple wiring question

[Breadstick]

I'm sticking a CyberHome Dvd player in an old NES, but having trouble reconfiguring the power and reset buttons. Trying to make the NES power button turn on the DVD player, and the NES reset button eject the disk. I've been following the directions from:
http://www.vintagecomputing.com/index.php/archives/83" onclick="window.open(this.href);return false;

Here's some pictures of my setup:



Here is the picture of this step from the vintagecomputing website:


He doesn't have the leads in the same position as I've seen on several other websites. In his picture, there seems to be only one wire leading to the left reset point, and the rest going underneath the circuit somewhere.

So I've been using the following image from http://www.exoid.com to base where to solder the wires. He states that the green is power, the blue is reset and the red is the LED. If so, where are the white wires leading?



Obviously I'm a newb, but I would appreciate a little direction, as my current configuration is not working

[doug104231]

the white wires are ground