Modding a Duo to remove that "part"

Moderator: Moderators

Post Reply
Rekarp
Portablizer Extraordinaire
Posts: 2163
Joined: Thu Dec 28, 2006 1:52 am
PSN Username: Lnghrn_
Steam ID: rekarp
Location: Austin, Tx
Contact:
Contact Rekarp

Modding a Duo to remove that "part"

Post by Rekarp »

Yes you know what "part" I am talking about. That silly little "part" of the board that sticks out and ruins the Duos sleek rectangular goodness. Well it only takes 3 wires and a bit of soldering to remedy that tumor of a PCB.

Image

Remove the power switch and the reset switch on the Duo. I opted to just cut them off with some snips but you can desolder if you really want to.

Image

Here is the scored line where to cut the board. Ignore that solder blob. It was left over from testing. The best way to remove it is to dremel it off or use a xacto knife and score it many times and snap it off.

Image

Connect the 17th pin from the left of the TCT chip to VCC (+5V). Its a really small legged chip so be carefull in your solder placement.

Image

Flip it over and connect these two traces with wire.

Image

Last wire. is on the back by the cut off area.

Image

Done!
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."
Top
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:
Contact eagle5953

Re: Modding a Duo to remove that "part"

Post by eagle5953 »

Moved to the SNES section of the Reference forum.
Top
Life of Brian
Moderator
Posts: 2867
Joined: Wed Aug 03, 2005 5:55 pm
Location: Oklahoma
Contact:
Contact Life of Brian

Re: Modding a Duo to remove that "part"

Post by Life of Brian »

You're my hero, Rekarp! That's a useful guide.
dragonhead wrote:sweet. ive spent a third of my life on benheck!
Image
Top
Triton
Moderator
Posts: 7397
Joined: Mon May 24, 2004 12:33 pm
360 GamerTag: triton199
Steam ID: triton199
Location: Iowa
Contact:
Contact Triton

Re: Modding a Duo to remove that "part"

Post by Triton »

THANK YOU. now i can see if i killed mine! lol
Top
grahf
Posts: 370
Joined: Fri Jun 23, 2006 7:08 pm
Location: Tokyo Japan

Re: Modding a Duo to remove that "part"

Post by grahf »

Cool, that was the first thing I was going to remove if I mod mine. (If? who am I kidding. WHEN i mod mine :lol:).

This saves me (and everyone else) the trouble of tracing the lines. Nice work.
Top
ABCinc
Posts: 110
Joined: Wed Apr 08, 2009 9:22 pm
Location: UT

Re: Modding a Duo to remove that "part"

Post by ABCinc »

quick question, how big is the mother board?
^ *Information above may be incorrect.* ^
^ *This signature may be incorrect.* ^
Top
Rekarp
Portablizer Extraordinaire
Posts: 2163
Joined: Thu Dec 28, 2006 1:52 am
PSN Username: Lnghrn_
Steam ID: rekarp
Location: Austin, Tx
Contact:
Contact Rekarp

Re: Modding a Duo to remove that "part"

Post by Rekarp »

ABCinc wrote:quick question, how big is the mother board?

bout the foot print of a SNES cart
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."
Top
ABCinc
Posts: 110
Joined: Wed Apr 08, 2009 9:22 pm
Location: UT

Re: Modding a Duo to remove that "part"

Post by ABCinc »

the whole SNES thing after you removed the part that was sticking out.
^ *Information above may be incorrect.* ^
^ *This signature may be incorrect.* ^
Top
Rekarp
Portablizer Extraordinaire
Posts: 2163
Joined: Thu Dec 28, 2006 1:52 am
PSN Username: Lnghrn_
Steam ID: rekarp
Location: Austin, Tx
Contact:
Contact Rekarp

Re: Modding a Duo to remove that "part"

Post by Rekarp »

ABCinc wrote:the whole SNES thing after you removed the part that was sticking out.
Yah about the foot print of a SNES cart >_>
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."
Top
ABCinc
Posts: 110
Joined: Wed Apr 08, 2009 9:22 pm
Location: UT

Re: Modding a Duo to remove that "part"

Post by ABCinc »

Rekarp wrote:
ABCinc wrote:the whole SNES thing after you removed the part that was sticking out.
Yah about the foot print of a SNES cart >_>
Oh... Sorry im a blonde. :lol:
^ *Information above may be incorrect.* ^
^ *This signature may be incorrect.* ^
Top
XCVG
Senior Member
Posts: 1947
Joined: Sun Dec 21, 2008 9:10 pm
Location: Canada

Re: Modding a Duo to remove that "part"

Post by XCVG »

Is the Retro Duo a normal 2 layer board? Or is it one of those boards with six gazillon layers?
Top
Rekarp
Portablizer Extraordinaire
Posts: 2163
Joined: Thu Dec 28, 2006 1:52 am
PSN Username: Lnghrn_
Steam ID: rekarp
Location: Austin, Tx
Contact:
Contact Rekarp

Re: Modding a Duo to remove that "part"

Post by Rekarp »

XCVG wrote:Is the Retro Duo a normal 2 layer board? Or is it one of those boards with six gazillon layers?
normal 2 layer.
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."
Top
XCVG
Senior Member
Posts: 1947
Joined: Sun Dec 21, 2008 9:10 pm
Location: Canada

Re: Modding a Duo to remove that "part"

Post by XCVG »

Rekarp wrote:
XCVG wrote:Is the Retro Duo a normal 2 layer board? Or is it one of those boards with six gazillon layers?
normal 2 layer.
Well that's nice to know. I can chop one up and know why it doesn't work! :lol:
Top
Post Reply

Return to “SNES”