copple of very very important questions

corky_the_portabiliser · Sat Apr 02, 2005 5:02 pm

hi everyone

i want to make a n64p but i hav a couple of question firstly what fan can i use in my system (what voltage) and how hard is it to relocate the card slot

goodie · Post by **goodie** » Sat Apr 02, 2005 5:04 pm

A 5 volt fan would probably work good. As for the cart slot, from what I've read, it is kind of tricky because it has to also be connected to the expansion port.

vskid · Post by **vskid** » Sat Apr 02, 2005 5:09 pm

The cart slot doesn't have to go into the ext. slot. You can solder it to the ext. connections on the board.

nos_slived · Post by **nos_slived** » Sat Apr 02, 2005 5:14 pm

Yea, it really isn't that hard. If you take the Extension port off, solder your wires to the hooles from that. If you don't take it off, pust the wires in fairly deep, and put it in the regular holes.

corky_the_portabiliser · Sat Apr 02, 2005 8:02 pm

thanks i will try it wen i get my n64 for portabilising btw should i use a ps1 screen or a gamecube?

corky_the_portabiliser · Sat Apr 02, 2005 8:03 pm

lol soz forgot ths while i was posting what is the ext and does it have any use while portabilising??

nos_slived · Post by **nos_slived** » Sat Apr 02, 2005 9:14 pm

1. HipGear is usually cheaper and comes with a bonus controller, but it doesn't really matter.

2. EXT Port was for the CD64, DD64, and DoctorV64 addons(mostly Jap). Not really used in portablized 64s.

3. Use edit button.

corky_the_portabiliser · Sat Apr 02, 2005 9:44 pm

lol ill remember that

nos_slived · Post by **nos_slived** » Sat Apr 02, 2005 9:48 pm

Glad to hear.