Psonep

[darthchris13]

Hi, well, cd driver is placed as you can see, just need to cut a part of it.I have made my first test and all works, screen seems dark, i think 3 leds on the four works well (full power) crap.......

[Rixer 1337]

Nice Case!

Do you have a link to where I can buy the plastic that you use for the case?

[darthchris13]

Thanks,

I don't bought the plastic card on the web, but with google i found that.

http://www.relishmodels.co.uk/scratchbu ... -card.html
http://cgi.ebay.co.uk/Plus-Model-*-Plas ... 125004r906

[khaag]

HOLY FREAKIN' CRAP! This is awesome! Well done!

[bacteria]

Nice job so far, like it!

How think is this system going to be ultimately??

[darthchris13]

Thanks guys,

Nice job so far, like it!
How think is this system going to be ultimately??

I'm not sure to understand what you mean, but if you are talking about "when i think this project will be finished, there is not a lot of works, soldering paddle and psone mobo, painting the back of the box and found batteries,it will be finished soon.

[bacteria]

No, a typo - I meant "thick" not "think"

[darthchris13]

Oh ok , if i use a camcorder batteries (boxed) therefore connected by outside, i think thickness is 50mm (under cd player) and 40mm(buttons).
Like this one:http://cgi.ebay.fr/Batterie-pour-CANON- ... .m20.l1116

If i use batteries placed inside the psone thickness is 60mm (cd driver) and 50mm(under cd player).it depends on the batteries I ordered.
Like this one (will be modified for sure):http://www.batteryspace.com/index.asp?P ... rodID=3217

++

[bacteria]

Yeah, mine ended up just under 60mm thick; although I plan to remake my system again if I get good results with the PSP joysticks; get it down to 50-55mm thick and sleeker. Might be worth relocating some of the capacitors on the PSone board in case you can make yours thinner?

[Mario]

This looks amazing! It's obvious you put a lot of time and effort in to this project. And that case was made by hand? It's beautiful. That is one portable to be proud of!

[darthchris13]

Yeah, mine ended up just under 60mm thick; although I plan to remake my system again if I get good results with the PSP joysticks; get it down to 50-55mm thick and sleeker. Might be worth relocating some of the capacitors on the PSone board in case you can make yours thinner?

Psone board is thin, i don't think it's necessary to touch something, the board is perfect like that, to my point of view for sure .you will gain on the thickness external with psp joystick, Don't you think you will be unhappy of play sensation with the psp joysticks, i don't like them , perhaps because of its position on the psp.
Good luck for your modification

This looks amazing! It's obvious you put a lot of time and effort in to this project. And that case was made by hand? It's beautiful. That is one portable to be proud of!

Thank you , Yes the case was made by hand , a big job but i think it's a good result even if i don't like the black paint, too late to change it.Don't worry i 'm still proud

[eurddrue]

I like worklogs like this. Not long and drawn out like 15-20 pages. just 4-5 pages of pure goodness.

[64M320N3]

That's the sweetest hand made portable EVER!!!!!!!!!
You better finish it; it looks great!

Also, did you paint on that design, or was it already on the plastic card?

[darthchris13]

That's the sweetest hand made portable EVER!!!!!!!!!
You better finish it; it looks great!

Also, did you paint on that design, or was it already on the plastic card?

tHANKS ^^,with my 2 weeks of vacancy i will advance it, if you speak about carbon design i don't paint it because it is a venilia , an adhesive plastic film with printed carbon

[64M320N3]

Oh, okay.
That makes a lot more sense now, especially how it looks so cool.
Congrats on your case (and soon to be portable). Honestly, I don't think it needs much more work.
Keep it up!