N64 Liuhu Edition

collinE · Post by **collinE** » Thu Jan 15, 2009 12:35 pm

Looks fine to me. What's the problem?

lovablechevy · Post by **lovablechevy** » Thu Jan 15, 2009 12:44 pm

here's a very quick and sloppy explanation done in paint. it should be wired like this if rotating it 180 degrees:

the way it is done now is not lining them up properly. it's like having 1 wired to 6, 2 wired to 5, 3 wired to 4, etc...

Liuhuparta · Post by **Liuhuparta** » Thu Jan 15, 2009 12:56 pm

Sorry to let you down guys, but I did it just the right way.

lovablechevy · Post by **lovablechevy** » Thu Jan 15, 2009 12:58 pm

ah ha! it's the bottom of the board! i thought i might have been missing something!

back to:

looking awesome! nice and neat!

Liuhuparta · Post by **Liuhuparta** » Thu Jan 15, 2009 1:11 pm

That happens more than should be. I doublechecked it of course. Or triplechecked to be sure! :D

I'm continuing this probably on monday, because that's when I go to school next time. I'm still not sure, what to do then, because I haven't got any parts yet! Still waiting for post to get them here.

I'm thinking to name this N64 Rumble, because I'm putting two GC rumble motors in this thing. It doesn't have the word portable in that, but I like it nice and short.

dragonhead · Post by **dragonhead** » Thu Jan 15, 2009 3:25 pm

woo thats good to know. didnt realize it was the bottom.

sipsorz3 · Post by **sipsorz3** » Thu Jan 15, 2009 4:16 pm

nobody seemed to have realized it was the bottom but in the pictures you can obviously see its the bottom of the board

(not that I noticed it)

dragonhead · Post by **dragonhead** » Thu Jan 15, 2009 4:23 pm

sipsorz3 wrote:nobody seemed to have realized it was the bottom but in the pictures you can obviously see its the bottom of the board (not that I noticed it)

im not familiar with the n64 board

sipsorz3 · Post by **sipsorz3** » Thu Jan 15, 2009 4:28 pm

dragonhead wrote:
sipsorz3 wrote:nobody seemed to have realized it was the bottom but in the pictures you can obviously see its the bottom of the board (not that I noticed it)
im not familiar with the n64 board

I could've guessed there was someone who isn't familiar with it, but look at the first pic, you notice the lack of components which almost always seem to be on top of a board.

collinE · Post by **collinE** » Thu Jan 15, 2009 6:45 pm

I'm at a loss for words.

Maybe it's because I'm doing an n64 right now and I'm familiar with the board, but how could so many A-list portablizers make such an obvious mistake?

Rekarp · Post by **Rekarp** » Thu Jan 15, 2009 6:59 pm

collinE wrote:I'm at a loss for words.

Maybe it's because I'm doing an n64 right now and I'm familiar with the board, but how could so many A-list portablizers make such an obvious mistake?

I have no idea what a N64 motherboard looks like.

Liuhuparta · Post by **Liuhuparta** » Fri Jan 16, 2009 6:21 am

Would anyone tell me, if these could work for me? Those would be the prfect size and capacity. I'm planning to locate them in both left and right handles. 5200 mah would me ideal!

E: Oh, Crap. I'm probably not willing to pay 70+ euros for batteries so this isn't a working solution for me.

What about this. Can I open the battery and relocate it's insides?

Basement_Modder · Post by **Basement_Modder** » Fri Jan 16, 2009 7:17 am

the second one, for sure!

you are able to open it, because its in shrinkwraped plastic. basicly just rip it apart, extend wires, and lay out the cells as you choose.

*walks away muttering about how this is such a great find*

ShockSlayer · Post by **ShockSlayer** » Fri Jan 16, 2009 3:22 pm

collinE wrote:I'm at a loss for words.

Maybe it's because I'm doing an n64 right now and I'm familiar with the board, but how could so many A-list portablizers make such an obvious mistake?

I know, right? It might just be because I've built 7 n64p's, but I don't know why they would make such a mistake either!

----Anyways:----

Great work so far!

The second pack is fine. You will be able to split it up, from the looks of it. I also reccomend that site, just a note, they provide a tracking number and they ship from california.

Kyo · Post by **Kyo** » Fri Jan 16, 2009 3:40 pm

This is going to make me sound like the poop egress who didn't say anything till the answer was revealed and then tells everyone that he knew it all along, but I thought it was fairly obvious that it was the back of the board. Wouldn't make much sense to have the front pointing at the cartridge anyway