PSP-110 Battery ???

okoaomo · Post by **okoaomo** » Tue Nov 06, 2007 9:55 am

Does any one have a solution to MOD this battery?

I've been searching forum after forum for 3 days and no answers.

There is a lot of speculation that it is the L02 chip in the first pic listed below, but NO ONE has posted any success so far.

Please Help?

Look @ these pics

Circuit Board back view
http://img159.imageshack.us/img159/5077/dsc03786zk9.jpg

Circuit Board front view
http://img117.imageshack.us/img117/7191/dsc03780qh1.jpg

Case top and bottom
http://img152.imageshack.us/img152/9715/dsc00435jq2.jpg

okoaomo · Post by **okoaomo** » Tue Nov 06, 2007 12:14 pm

I found this Data Sheet

http://www.rohm.com/products/databook/g ... 1a-w-e.pdf

With any luck it looks like pin 4 is the groung on the L02 chip.

Can NE1 confirm this is the Data Sheet for the EEPROM on this OddBall PSP-110 Battery?

OKOAOMO

kasar · Post by **kasar** » Tue Dec 18, 2007 6:39 pm

i think i can help you, I also moded my psp-110 battery (the same battery ,i think)

well, first i advise my english sucks a little, but well, iÂ´m going to try explain it anyway.

i supose this is your battery.

open it carrefully because it can be broken easly

i didnÂ´t made a normal pandora mod, i made a dual pandora batery (pandora + normall all in one) you can swich normal/pandora modes only with a switch ^^

ok here you have some pics

http://img263.imageshack.us/img263/4862/dscn7726wy5.jpg
http://img263.imageshack.us/img263/9199/dscn7728bk6.jpg

you must "unsolder that "chip" "leg" and unput it up off the original place, and then solder a cable, then solder the other side of the cable to a switch and the other side of the swich to the battery pole like on the photos.

http://img263.imageshack.us/img263/4323/dscn7732qe4.jpg

http://img89.imageshack.us/img89/6679/dscn7731jz0.jpg

then you can place the switch out side or inside the battery and make a little hole for handle it easly from outside.

then close carefully the battery and put some "superglue" or another kind of glue on it. and put something on it to make some preasure (it will helps to recover the original small size.

i hope this help you

"srry for my bad english ^^"

<b>edit by mod:</b> Huge pictures are huge. Please use thumbnails next time. (On ImageShack, use the "Thumbnail for forums 1".) <i>-bicostp</i>

edit by kasar: thx bicostp, the next time I will

kasar · Post by **kasar** » Sat Jan 12, 2008 7:55 pm

IÂ´m srry , I checked again your battery images and it seems diferent from my 110 battery,so check this post

http://forums.benheck.com/viewtopic.php?p=272726#272726

I hope this help you