Making an edge.
Moderator: Moderators
-
Kurt_
- Portablizer
- Posts: 5748
- Joined: Thu Nov 24, 2005 10:32 am
- Steam ID: kurbert
- Location: Ontario, Canada
- Contact:
Making an edge.
Any ideas on how to make an NEAT edge that's similar all the way around the case on both halves?
Hey, sup?
-
joevennix
- Portablizer
- Posts: 999
- Joined: Sat Jan 14, 2006 9:34 am
- Location: On permanent vacation from reality.
If you have access to a router, that is the easiest way. Cut the shape out of wood, put a template bit in the router, put the two plastic sheets underneath the wood, and move it around the bit. The top part has a roller that the wooden shape slides along, and the bottom part is a blade that cuts the plastic.
