Question concerning the Polaroid BT41DG

TitaniumHamster · Post by **TitaniumHamster** » Mon Jul 24, 2006 7:34 pm

How much power to I have to send IN to the battery?

Post by **Skyone** » Mon Jul 24, 2006 7:52 pm

1) What does this have to do with N64?

2) You don't send power to the battery unless you're charging it.

Klefmung · Post by **Klefmung** » Mon Jul 24, 2006 8:03 pm

It is the one marshall used on the l64 IIRC. But that is all. I second the notion that this be moved to Technical Q&A

Post by **Skyone** » Mon Jul 24, 2006 8:04 pm

Ah.... so what is he even asking?

Klefmung · Post by **Klefmung** » Mon Jul 24, 2006 8:06 pm

When recharging, how much power needs to be sent into it?

TitaniumHamster · Post by **TitaniumHamster** » Mon Jul 24, 2006 8:18 pm

Klefmung wrote:When recharging, how much power needs to be sent into it?

Exactly. It outputs 7.4v, and It's go'n in my 64SS.

Will 7.4 work, or do I have to use 9v? I think i remmeber the L64 requiring 9v...

Post by **marshallh** » Mon Jul 24, 2006 8:23 pm

The wall wart that comes with the DVD player is about 9v. Just get a 9v wall wart and wire that to the bottom two terminals. The output terminals are the upper pair. There are positive and negative symbols in the plastic, just look closely.

Moving to Tech Q&A.

Post by **gannon** » Mon Jul 24, 2006 8:25 pm

You normally need 1.5-2V more to charge a cell than what it outputs.

TitaniumHamster · Post by **TitaniumHamster** » Mon Jul 24, 2006 8:29 pm

marshallh wrote:The wall wart that comes with the DVD player is about 9v. Just get a 9v wall wart and wire that to the bottom two terminals. The output terminals are the upper pair. There are positive and negative symbols in the plastic, just look closely.

Thanks!