Gamecube video mods+GC info

Harshboy · Post by **Harshboy** » Sun Mar 05, 2006 8:42 pm

Ok, all this stuff has been mentioned, but heres a lot of stuff:

Wiring everything:

Simple Switch diagram with on/off LED:

Gamecube wire info:

Headphone adapter:

Screen pinouts for wiring help for picture 1:

elementxmaster · Post by **elementxmaster** » Mon Mar 06, 2006 10:31 am

usbcd36 · Post by **usbcd36** » Thu Mar 30, 2006 7:10 pm

Does anyone happen to know what the pots on a GameCube analog stick are rated for? I've searched, and come up with nothing.

Harshboy · Post by **Harshboy** » Tue May 16, 2006 6:48 pm

A nice Audio/Video Pinout diagram for the Gamecube:

Motherboard (Backside):

Code: Select all

Red= Right Audio
White= Left Audio
Yellow= Composite Video
Black= Ground

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed May 17, 2006 2:57 pm

this was a useful post by squee that helped me save a little time

S q u e e ! wrote:
honey wrote:where in your diagram is the (+) and the (-) for the gamecube? or where on controller wired the gamecube (+) and (-).
what a kid of controller mean you?
I mean a standard GC controller. The positive and ground are sent to the GC through the controller. Just cut of the controller end, and look at where the wires attach to the GC.

EDIT: Never mind, I'll post a schematic soon.

EDIT 2:

Here it is. Connect all the spots where the exposed metal on the controller port one went into the controller circuit board. Then connect that mass of wires to the bundle of exposed wires on the outside, and in the middle of the controller wire.

Remember, this diagram is when looking at the GC controller port one, from the front.

Harshboy · Post by **Harshboy** » Wed May 17, 2006 4:19 pm

If i got that correct, then this should also be correct:

Btw, that is the backside of the Controller Board

Hope this helps.

EDIT: Please switch the Blue and White. I will edit the picture ASAP! I hope i didnt fry any controllers

S q u e e ! · Post by **S q u e e !** » Sat Jul 01, 2006 4:04 pm

Nope. Switch white and blue.

daguuy · Post by **daguuy** » Wed Jul 05, 2006 12:35 pm

which of these 2 pins is + and - ?

i have no PSU so i can't find out myself

EnterTheHatrix · Post by **EnterTheHatrix** » Sun Jul 30, 2006 2:23 pm

Just spent the past hour making this.

Feel free to host it here or on some resource, but keep my name on it.

If there are any problems with it, let me know.

That's one of my first contributions and hopefully it will be useful to some people.

Just on a note though, Pin 5 (The Silver one) only appears on Controllers 1 and 2. Does anyone know why it doesn't go back to the cube on Controllers 3 and 4? Perhaps something like the Gamecube checks to see if Controller 1 and 2 are plugged in for game features but doesn't give a crap if 3 or 4 are plugged in? Or could it be for additional peripherals such as Dance Mat which is only 2 player anyway?

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Sun Jul 30, 2006 3:17 pm

great info on there

EnterTheHatrix · Post by **EnterTheHatrix** » Mon Jul 31, 2006 7:19 am

Here's an old VGA I did a few months ago, Just thought you guys could check through it.

EnterTheHatrix · Post by **EnterTheHatrix** » Mon Jul 31, 2006 8:41 am

I need the pin out on both the DVD controller and the motherboard connection to the DVD controller. I just ripped up about 5 of the traces on the DVD unit .. They looked desoldered, but now I need to track each of the traces and solder directly to those instead. Hell!

Corscaria · Post by **Corscaria** » Mon Jul 31, 2006 9:22 am

EnterTheHatrix wrote:Just on a note though, Pin 5 (The Silver one) only appears on Controllers 1 and 2. Does anyone know why it doesn't go back to the cube on Controllers 3 and 4? Perhaps something like the Gamecube checks to see if Controller 1 and 2 are plugged in for game features but doesn't give a crap if 3 or 4 are plugged in? Or could it be for additional peripherals such as Dance Mat which is only 2 player anyway?

I reversed the controller board myself about a month ago, and wondered the same thing. A patent search reveals that lightguns can be plugged into ports 1 and 2.

jeroen · Post by **jeroen** » Mon Jul 31, 2006 9:39 am

wow I never knew gc supported light guns.

EnterTheHatrix · Post by **EnterTheHatrix** » Mon Jul 31, 2006 10:37 am

Homebrew lightgun anyone?

Update:

I made a request for pinout on the DVD unit and mobo connection.

I made a quick diagram of the DVD unit front and back so if you rip the traces like I did, you now have an alternative soldering point.

Sorry about the crude drawing.

This is the top left of the board so you know which way round it goes.

The grey circles are soldering points.The black outlines are the traces. The green circle outlines are the holes that lead to the other side of the board. The Green square outlines are the soldering points that are in tact (or that you ripped up like in my case) on the other side of the board.

And in reverse order.

green parts are on the other side of the PCB.

I decided not to number these to save confusion if there's already some documentation online which it may conflict with. I will try and do the pin numbering from the mobo side next, and I'll do a nicer diagram of both boards with the proper pin outs.