If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.
I can't get my ps1 lcd to turn on it starts up and flashes white for a sec then it goes blank. i have a wire from the + battary 5 AA 7.5v to pin 1 and the - to pin 2 I also soldered a wire from pin 12 to the 5v leg of the 7805 like it is in PS1 pin out and a wire from the nes ground to GND2 and I get nothing. When I hook it to my ps1 it works fine so it not my lcd.
mybe my nes is wired wrong. I have 5AA the + of the battary is going to the uints power on swith the - is going to the middle of my 7805 the other wire on the power swith is going to the unregulated input. On the +5v leg I have a wire going to the +5v hole on the nes. I have a wire from the middle of the 7805 to the ground on the nes. the RF MOD is removed
Can some one help me pics will help a lot.
Are the AAs alkaline? If they are dont use them the PSOne sceen draws close to an amp an hour, alkaline cant handle a heavy draw. Heres how to menidy that go to your nearest RadioShack and buy pack or two of rechagable AAs with a charger. Through 6 (equaling 7.2 volts) of those into your battery holders. That should fix your problem.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
ditch those crappy alks! and replace it with http://www.ripvan100.com/products_sanyo2500mah.htm those, i think alks are something like 600mah (i think) so this way you will be getting over 4X as much power!
