What is better???

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

Black Six wrote:
Cyberblade wrote:I'm guessing it's called "shaving cream" because Ben, or one of the other mods here has heard an extremely old song by the same name, please correct me if I'm wrong.

...An old lady died in her bathtup, she died of a terrible fit. In order to fulfill her wishes, she was buried in six feet of...Shaving cream! Be nice and clean, shave every day and you'll always look keen....
Well, actually I put that in because my physics teacher says it, and it's kinda funny, especially when he says 'Oh bull shaving cream!' or something like that. I guess I know where he got it from now...
So, if you're the one in charge of the censor, do you think that you could make the word that gets turned into crud an noncensored word? it's really not that bad and worse words such as "damn" and "ass" are ok, and that's from Ben himself
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
Black Six
Moderator
Posts: 1991
Joined: Sun Apr 04, 2004 4:34 pm
360 GamerTag: Black 5ix
Location: MD

Post by Black Six »

I wouldn't say I'm in charge, more like I was exploring one day and found it and was like, 'Oh I can add all those funny phrase smy physics teacher uses.' I don't think I added anything to the filter, just changed a couple of the things that it filtered to.
"It's not that life's so short, it's just that you're dead for so long." -Anonymous
Threads Closerized: Lost Track, Whoops
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

So howd did we get on this topic?
Sparkfist
Forum Administrator
Posts: 6754
Joined: Tue Apr 20, 2004 7:12 am
Location: Michigan

Post by Sparkfist »

Someone asked why its "shaving cream" and not ... well we already know what is to replace.

Anyways for the person that is looking to get a GTA as it seems that its got the most praise, go into the search function and set it to GTA under the "Fourm 42" specific option. The thread I believe was started by a guest and so you can check those first, the store is in england so it will take longer and cost more to ship.

Good luck, and I wish the same to your band.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too

I am a geek.
SgtBowhack

Post by SgtBowhack »

People seem to be overlooking the facts about the GTA that
a) The company Mystery seems to have disappeared off of the face of the earth, so the NES adapter will most likely not come out
b) It's been out for ages, and they haven't rectified that problem yet...

Though it's still way better than the GameAxe :) I'm still tempted to buy one, despite being able to only use my Famicom games (which number about 25 compared to my NES cart count of around 130) :(
Anyway, my 2 yen.
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

Actually you can play nes games on it
SgtBowhack
Posts: 831
Joined: Wed Dec 08, 2004 5:16 am
Location: Chicago, USA

Post by SgtBowhack »

If you want them to crash every three seconds.
My point is that it's a mistake to say that Mystery WILL come out with the converter even though someone has said that they plan to. It's a fairly easy thing to make- wouldn't take them very long to come out with it, I'd imagine.
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

I made one and it works fine
SgtBowhack
Posts: 831
Joined: Wed Dec 08, 2004 5:16 am
Location: Chicago, USA

Post by SgtBowhack »

Did you make a wibbly wobbly one so that jarring it wouldn't cause absolute ROM peril then? Honeybees sure don't seem to like it.
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

I made one and vacum formed a case
SgtBowhack
Posts: 831
Joined: Wed Dec 08, 2004 5:16 am
Location: Chicago, USA

Post by SgtBowhack »

That sounds cool. How much does vacuum forming cost per attempt, roughly? I'd like to vacuum form a case for my NES/Famicom/Genesis/SMS beast (the NES and SMS support comes from built-in adapters hooked up to a Genesis 2 and Famikonyarou, which is somewhat similar to the NOAC Power Players I've been hearing about in America except the build quality is probably tons better). Though I'm not sure how one would go about vacuum forming an entire case...
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

Well my tables only big enough for small plastic parts for adapters etc but it costs me $2 for 2 cases
SgtBowhack
Posts: 831
Joined: Wed Dec 08, 2004 5:16 am
Location: Chicago, USA

Post by SgtBowhack »

Wow, not bad. I really should look more into it.
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

The sheet is not that muh and I got the element from old tosterovens from......................A DUMPSTER
Post Reply