HAZAAAA....Kinda? 56K BEWARE!

demonofaj · Post by **demonofaj** » Thu Nov 10, 2005 6:01 pm

Well it's finished, my PSONEp is finished...with the exception of a controller. It busted up and the wires got loose, so in the end I just took it off. It runs off 7.2V RC Car Battery. It's uber cool...but not like Atka's

. Hey, I can take it to go at least...
BTW: Some of my stuff fried, so I replaced 7805, which worked

. I modded the PSONE slightly, making it lighter, I just cut the sides. Added in PERMANENT CD motor, making it unstoppable, even WITH the lid open. I plan to rebuild the controller, and work on my GenesisOTG. Wish me luck, and pics. included!

PSONEp itself

Running on battery...
I'd just like to replace the past photo with this: Rahat, you're freaking dead!

Well, that's a all folks...for now that is!

vb_master · Post by **vb_master** » Thu Nov 10, 2005 6:02 pm

And now we know.

demonofaj · Post by **demonofaj** » Thu Nov 10, 2005 6:06 pm

Yes, I look creepy, and I had hat hair at the moment

alight1992 · Post by **alight1992** » Thu Nov 10, 2005 6:18 pm

pic number 1 is blury

vb_master · Post by **vb_master** » Thu Nov 10, 2005 6:19 pm

vb_master wrote:And now we know...

why you spam so bad.

demonofaj · Post by **demonofaj** » Thu Nov 10, 2005 6:21 pm

G-force · Post by **G-force** » Thu Nov 10, 2005 6:32 pm

I think he was reffering to your age, and how you used to spam pretty bad. You're better now.

Why the hole in the CD lid? is it a secret compartment?

demonofaj · Post by **demonofaj** » Thu Nov 10, 2005 6:42 pm

OOOOK, but that isn't me. Read edit, and you know what, I'm gonna remove it. It creeps me out personally.

@G-Force: Actually two, add a cool urban style to it, nevertheless I had to cut it to make it fit for the new wiring I did, to make it power safe. My 7805 outputs a bit less amperage and is bigger though.

minkster · Post by **minkster** » Thu Nov 10, 2005 6:42 pm

G-force wrote:I think he was reffering to your age, and how you used to spam pretty bad. You're better now.

Why the hole in the CD lid? is it a secret compartment?

Maybe its so it doesn't over heat

demonofaj · Post by **demonofaj** » Thu Nov 10, 2005 6:45 pm

Yes 'overheat', btw: Is my urani..I mean happy rock glow thingy rock.

xxxeagle · Post by **xxxeagle** » Thu Nov 10, 2005 6:57 pm

Good Job. The permanent cd motor doesent get power if the lid switch isn't down though does it so how could it stay on all the time.

demonofaj · Post by **demonofaj** » Thu Nov 10, 2005 6:58 pm

I used Atka's wiring diagram to connect it via wire.

Code:
0-----0
0-----0

From the underside of the mobo the pins should look like this.

madc0w · Post by **madc0w** » Thu Nov 10, 2005 7:20 pm

why did you cut down the screen, then put it back in the casing?

*o* · Post by ***o*** » Sat Nov 12, 2005 9:34 pm

cool! how did you replace the hub motor? coul;d you explan that plz?

demonofaj · Post by **demonofaj** » Sat Nov 12, 2005 9:48 pm

Not the hub motor, I just put in a new 7805. There was nothing wrong, but I'm peckish at battery life, so I installed a new one. Just desolder and resolder.

@xxxeagle: even when the CD lid as all the way down, no power. So atka gave me the wiring diagram to just connect it electrically without any manual help.