Radica Help

jv3794 · Post by **jv3794** » Sat Aug 06, 2005 9:57 pm

How do I get the rom chip off of the board?

demonofaj · Post by **demonofaj** » Sat Aug 06, 2005 11:29 pm

You know, you should search for this kind of stuff. Anyway, just desolder off the rom chip, which is rather hard. But SBF found a way (WRITTEN IN THE FRONT PAGE, RIGHT HERE) to just cut the traces.

But really, search.

sbf · Post by **sbf** » Sun Aug 07, 2005 12:18 pm

on the right hand side of the black blob is a via, this needs to be cut as well.

so basically cut all the lines on the chip, all the vias, desolder any solder blobs and cut any vias underneath them.

I'll have to post a pic in a couple of days.

jv3794 · Post by **jv3794** » Sun Aug 07, 2005 2:38 pm

I saw some info on it further down on the page.

Thanks a lot. I got it off, but i had a little problem, some of the white lines are
peeled up and I'm wondering if its possible to still solder to them. (I'm a noob
if you haven't noticed.)

EvilnessNMyVeins · Post by **EvilnessNMyVeins** » Sun Aug 07, 2005 4:08 pm

Just keep going with it and if you screw up oh well, It will be one of the many mistakes that will happen. Don't worry about not searching just remember next time, Demonofaj usually never searches anyway.

demonofaj · Post by **demonofaj** » Mon Aug 08, 2005 1:39 pm

True that

.