problems -_- (work log)

[nobble]

only to up the sensitivity

[MigueLLLLL]

Did you follow the diagram here on page 3? make sure that the negative lead is connected to the middle pin and each positive pin for the c-buttons is connected to the other pins like this:

yea but that is for only first party

Don't you need resistors for that to work properly?

that is just to make it more smooth you don't need it it just makes it so you don't need to push so hard

[MigueLLLLL]

*gasp* OMG i just though of something.... i might take the analog stick out of my psp and use it with the first party and the c-stick with the first party!!!!!!!!!!!!!!!!!!
but does anyone know if using the psp analog stick is possible??

[geno whirl]

I guess it would if it works the same way as a gamecube joystick. Don't know for sure though. It would be kinda small wouldn't it? and why would you want to take apart your psp (unless it was broken)?

[limpport]

A PSP stick has 4 connections, and the resistance value is different.

[geno whirl]

While reading the "Do we have room for another n64p?" thread, Bino Gas gave this great link which might be what you are looking for. It is very similar to a psp stick and it's REALLY small.

[MigueLLLLL]

ah thanks geno (again ) but yea its broken (i just have to find it )

[geno whirl]

Yeah. I think i might have to look more into that joystick myself

[blaze3927]

dont try to swap a psp joystick with a first party one...wait until kibble does the translation

the c stick has six pins but iusually works off x, Y, vcc and ground which the psp one uses , however just google search psp dual nub/razor x and itll show you how to convert it to buttons

[MigueLLLLL]

kk

[MigueLLLLL]

so i was looking into the n64 forum and i found this http://nfggames.com/forum2/index.php?topic=3574.0" onclick="window.open(this.href);return false; i think i might do this to have the c-stick and better analog stick XD
UGHH but this means it is gonna take me a lot longer to finish

[nachoz12341]

dont even try your going to end up with a lot of broken parts its only your first portable so try to keep it simple so if i were you id focus on the gc analog in the 3rd party controller

[MigueLLLLL]

nope im going all out on this XD i already started and i am just waiting for the atmega8 chip

[NateN34]

so i was looking into the n64 forum and i found this http://nfggames.com/forum2/index.php?topic=3574.0" onclick="window.open(this.href);return false; i think i might do this to have the c-stick and better analog stick XD
UGHH but this means it is gonna take me a lot longer to finish

dont even try your going to end up with a lot of broken parts its only your first girlfriend so try to keep it simple so if i were you id focus on the gc analog in the 3rd party fun parts

[MigueLLLLL]

y quote when your not gonna say anything