why isnt my n64 working

*o* · Post by ***o*** » Mon May 23, 2005 4:53 am

great i will look for nus-1 over anything else

Warrior_Rocker · Post by **Warrior_Rocker** » Mon May 23, 2005 4:58 am

yea, for instnace, i could run the nus-01's 3.3v line at 5v, i was testing using an old atx psu, and it did not fry or anything, it got a little warmer, cuase thats what happens, but at least you have a extra tolerance

Jaytheham · Post by **Jaytheham** » Mon May 23, 2005 5:01 am

The PIF is the security chip, so by connecting a NTSC PIF to a PAL N64(with some switches to change between the PAL and NTSC chips) you can make a system which plays games from both regions. You can do this either way of course.

Post by **gannon** » Mon May 23, 2005 5:17 am

Yeah, I have a few. I'll have to find my benzine torch to desolder them though

*o* · Post by ***o*** » Mon May 23, 2005 5:22 am

hhhmmm desoldering with a blow torch *thinking face*

Post by **gannon** » Mon May 23, 2005 7:47 am

It's the easiest way to desolder smt or large through-hole chips

*o* · Post by ***o*** » Tue May 24, 2005 1:41 am

ok i returned my non working n64 today they give me a new one and guess what the exact same thing happened

nos_slived · Post by **nos_slived** » Tue May 24, 2005 1:49 am

You do have a game in, right?

*o* · Post by ***o*** » Tue May 24, 2005 1:49 am

yes and a jumper pak but it doesnt work it doesnt even flicker

daguuy · Post by **daguuy** » Tue May 24, 2005 2:56 pm

i hate when that happens. if my next one dies, i'll probably build a PSP. i was playing my playstation last night and i realized it was better than n64 and i've heard it's one of the easiest to portablize

*o* · Post by ***o*** » Tue May 24, 2005 3:43 pm

the system is simple buy a screen psone and battery......finished!