Gamecube portable project worklog.

Nintendott · Post by **Nintendott** » Fri Sep 04, 2009 8:25 am

Now i got the new regulator and it worked

Now an error is showing up again, (gota fix em all!)

Nintendott · Post by **Nintendott** » Sat Sep 05, 2009 8:29 am

I instaled the Xeno mod chip and the chip worked, but the error is still showing up !

Dang that pisses me off!

What happened to everybody?

64M320N3 · Post by **64M320N3** » Sat Sep 05, 2009 6:14 pm

Nintendott wrote:What happened to everybody?

We're still here.
Oh, and a modchip won't fix all of your problems. It doesn't bypass the errors. At least, not for the gamecube, anyway.

Nintendott · Post by **Nintendott** » Sun Sep 06, 2009 4:24 am

Yea i know that. I baught the chip to play copied games and make it region free.

I have been trying to fix the error for 18 hours know so i think i just have to re solder everything and try again.

Here`s whats happening: When i turn it on, the game cube logo starts spining around and when the disk drive start spining around the error shows up

I re soldered the disk drive and tried again.
i waited for about 7 seconds before the gamecube logo and error showed up.
Why?

64M320N3 · Post by **64M320N3** » Sun Sep 06, 2009 2:30 pm

This error originates from that the GC can't find the DVD Rom drive. The problem arises if your DVD daughterboard isn't properly connected to the Motherboard. Check all of your connections with a multimeter. (If you don't have one, get one.)

Nintendott · Post by **Nintendott** » Tue Sep 08, 2009 2:01 pm

Hey, can this capacitor (If it is one) be used for the S-video on PAL screen?

NIZCON 220uF 16V

http://img338.imageshack.us/img338/737/cimg2319.jpg
SCALE IMAGES BEFORE POSTING THEM! -B6

Nintendott · Post by **Nintendott** » Wed Sep 09, 2009 3:14 pm

OK, here is a simple what i want picture.

Nintendott · Post by **Nintendott** » Fri Sep 11, 2009 2:28 pm

The controller is melted with the case with ABS cement to make it as strong as possible

I don`t have any more errors showing up so this portable will be finished with in 3 weeks

hackmodford · Post by **hackmodford** » Sat Sep 12, 2009 12:00 pm

I can see it!

Nintendott · Post by **Nintendott** » Sat Sep 12, 2009 1:50 pm

YES you can!
Its going to be smaller than SS`s, i think cuz i got everyhting in the case

argelfraster · Post by **argelfraster** » Sat Sep 12, 2009 2:42 pm

How can you get everything in the case?
The Disc Drive is like the same thickness as the case....

Nintendott · Post by **Nintendott** » Sat Sep 12, 2009 3:29 pm

Not if you cut everything down.

argelfraster · Post by **argelfraster** » Sat Sep 12, 2009 4:21 pm

pics or GTFO

Nintendott · Post by **Nintendott** » Sat Sep 12, 2009 4:35 pm

After the ABC cement has dried.

Nintendott · Post by **Nintendott** » Mon Sep 14, 2009 6:01 am

Okay, i modded the PAL PSone screen to make it take S-video.
It Worked, but no colors or sound and the picture was jumping around like a retard.
I Used a 220 uF 16V capisitor.
Capisitor - to the screen and + chroma IN.
Luma to compasite on screen.
What did i do wrong?

benheck.com Forums

Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.

Re: Gamecube portable project worklog.