New paint job! PICS!
Moderator:Moderators
- atkafighter
- Posts:469
- Joined:Sat Jun 18, 2005 9:16 pm
Nothing much only a new paint job. Sorry if this seems spammy.
APE ESCAPE!!!
APE ESCAPE!!!
- atkafighter
- Posts:469
- Joined:Sat Jun 18, 2005 9:16 pm
Hi,
Thanks for the comments. About the LED mod as you can tell it is not a modded screen. The screen is very vibrant, its as good (if not better) than the real PSP lcd. As far as battery life I think I get about an hour. I haven't done an official time yet, but its enough for me to beat Arcade mode of Tekken 3 about three times.
Thanks again
Atkafighter
Thanks for the comments. About the LED mod as you can tell it is not a modded screen. The screen is very vibrant, its as good (if not better) than the real PSP lcd. As far as battery life I think I get about an hour. I haven't done an official time yet, but its enough for me to beat Arcade mode of Tekken 3 about three times.
Thanks again
Atkafighter
-
- Posts:9
- Joined:Sat Oct 08, 2005 10:10 am
Hey, I'm a new user, and I have one quick question, how old do you think I would have to be in order to make a ps1p, or dare I say it, Ps2p. Also, how would I be able to make a good casing? Is there a store or something? If not, how do I make it? And finally, for those experts out there, on a ps1p, would it be possible to also add dvd funtionality, like adding dvd components or something?
- marshallh
- Moderator
- Posts:2986
- Joined:Sat Sep 10, 2005 2:17 pm
- 360 GamerTag:marshallh
- Location:here and there
- Contact:
It really doesn't matter how old you are, but more how much you are willing to learn. I started with electronics when I was 8, and if I had the internet back then I would have a huge advantage. Thankfully you do have that advantage.
Ben says that the PS2p was the hardest project he's made, and that carries a lot of weight coming from him. If you made a PS1 portable, it can only play games and audio cds. I think there was a MPEG-1 decrompessor kit that allowed you to play Video CDs, but thse are basically non-existent now.
Ben says that the PS2p was the hardest project he's made, and that carries a lot of weight coming from him. If you made a PS1 portable, it can only play games and audio cds. I think there was a MPEG-1 decrompessor kit that allowed you to play Video CDs, but thse are basically non-existent now.
- bicostp
- Moderator
- Posts:10491
- Joined:Mon Mar 07, 2005 5:47 pm
- Steam ID:bicostp
- Location:Spamalot
- Contact:
Age is not a factor when it comes to portablizing. As long as you're allowed to use tools like a soldering iorn and a saw (or if you can get an adult to help you), then you're good to go!
The disc-based systems (PSone PStwo Gamecube) are a bit more challenging than the old cartridge-based systems (NES SNES Genesis), because of the spinning disc and the power it takes to make it work. If you're unsure about your abilities, go with a SNES or even an N64. (but watch out because most N64s fry easily)
Sorry, but no you can't modify your PSone to play DVDs. It just doesn't hae the hardware to support them. However you can install a mod chip which would let you play VCDs (CDs that act like DVDs), but the playback kinda stinks.
As far as cases go, you can make one out of plastic like the hand-built cases from the book, you can use a vacumn-form machine, you can modify the cases your console is built into (aka "frankensteining"), or you can use a Radio Shack project box. Basically whatever you want to use, as long as it's durable, can be made into a case. (But remember that the cases will be at least as big as the original console unless you're making an Atari 2600p)
The best thing you can do is read around the forums (and of course Ben's portable pages) and see what would fit you best.
The disc-based systems (PSone PStwo Gamecube) are a bit more challenging than the old cartridge-based systems (NES SNES Genesis), because of the spinning disc and the power it takes to make it work. If you're unsure about your abilities, go with a SNES or even an N64. (but watch out because most N64s fry easily)
Sorry, but no you can't modify your PSone to play DVDs. It just doesn't hae the hardware to support them. However you can install a mod chip which would let you play VCDs (CDs that act like DVDs), but the playback kinda stinks.
As far as cases go, you can make one out of plastic like the hand-built cases from the book, you can use a vacumn-form machine, you can modify the cases your console is built into (aka "frankensteining"), or you can use a Radio Shack project box. Basically whatever you want to use, as long as it's durable, can be made into a case. (But remember that the cases will be at least as big as the original console unless you're making an Atari 2600p)
The best thing you can do is read around the forums (and of course Ben's portable pages) and see what would fit you best.
Twitter
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
The most important factors I think in making a PS1p, are, experience, being very careful, and Having lots of money, for when you almost certainly break it.
Need unique content writer for your website? Check out http://www.uniquecontentcreation.com/
- bioniclebert
- Posts:1287
- Joined:Sat Jul 23, 2005 11:04 am
- Location:Buffalo.
- Contact:
thejellydude wrote:Hey, I'm a new user, and I have one quick question, how old do you think I would have to be in order to make a ps1p, or dare I say it, Ps2p?
Well at least the age where you know how to spell your name, and tie your shoes
Seriously, I made my first NES-P when I was 12. (But I forgot to mention Id had some electronics experience prior to that) I modded my atari to have compostie video about 2 months before (I think). That was my first thing i soldered!!!!
So yeah just make shure you have the dough to pay for all of the sthuff. We can help on any questions you have (But remember, its always better to learn it, not following mindless commands!)
Making XNA Games in C#.
- Darth Fett
- Posts:936
- Joined:Sun Oct 09, 2005 6:21 pm
- Location:On my giant space station. Firing on earth in 3...2...1...
- Contact:
Age means nothing to a true Gamer.thejellydude wrote:Hey, I'm a new user, and I have one quick question, how old do you think I would have to be in order to make a ps1p, or dare I say it, Ps2p. Also, how would I be able to make a good casing? Is there a store or something? If not, how do I make it? And finally, for those experts out there, on a ps1p, would it be possible to also add dvd funtionality, like adding dvd components or something?
Laugh and the world laughs with you; It's inhabitants are an entirely different story.
- XPCportables
- Posts:1020
- Joined:Mon Aug 08, 2005 3:27 pm
- Location:The end of time...