controller ?'s

new york cheech · Post by **new york cheech** » Mon Jul 18, 2005 9:50 pm

if i cut the controller than what do i solder the wires onto so i can put the buttons into diferent spots?

daguuy · Post by **daguuy** » Mon Jul 18, 2005 9:51 pm

solder to the threads that used to go to the buttons

new york cheech · Post by **new york cheech** » Mon Jul 18, 2005 9:52 pm

so solder from right where i cut it?

daguuy · Post by **daguuy** » Mon Jul 18, 2005 9:55 pm

that would work but it doesn't matter where on the thread you solder as long as it's on the right thread

new york cheech · Post by **new york cheech** » Mon Jul 18, 2005 9:58 pm

is there an easier way then cutting it? cause i need the buttons on different sides of the screen.

daguuy · Post by **daguuy** » Mon Jul 18, 2005 10:14 pm

yes. here's the 2 ways to relocate it. i just finished it to put in an N64p guide thing i'm making

. this is D-pad and joystick, but you do the same thing. those things with a black dot in them on the separate pcb are tact switches

new york cheech · Post by **new york cheech** » Mon Jul 18, 2005 10:19 pm

you're putting a guide together? thats awesome, i cant seem to find one that really explains everything. when will it be ready? is it on a website where i can see it?

daguuy · Post by **daguuy** » Mon Jul 18, 2005 10:23 pm

i don't have a website for it or anything, unless someone puts it on POD. it should be done in hopefully a few days

. when it's done, i'll post it in the N64 forum and hopefully someone will sticky it

new york cheech · Post by **new york cheech** » Mon Jul 18, 2005 10:29 pm

cool, i cant wait to see it, cause i really need it bad lol.

if i cut only the dpad off, that wont interfere with the other side right

daguuy · Post by **daguuy** » Mon Jul 18, 2005 10:33 pm

right

new york cheech · Post by **new york cheech** » Mon Jul 18, 2005 10:38 pm

what if i nipped a piece of the right side of the right dpad button off? will it still work?

daguuy · Post by **daguuy** » Mon Jul 18, 2005 10:43 pm

if you do the one in the top of the pic, it'll work. if you do the one in the bottom of the pic, i'm not sure