NES mod questions (power and regulation, cartridge slot etc)

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator:Moderators

MichelMoermans
Posts:16
Joined:Sat Jun 18, 2011 2:14 am
Re: NES mod questions (power and regulation, cartridge slot etc)

Post by MichelMoermans » Wed Nov 09, 2011 4:45 am

jaqiefox wrote:But... that's just the problem! did you look at that part number? it's got a 0.1" (2.54mm) pitch, not 2.5mm like the NES cartridge has!......
Oops, my bad. That's what I get for copy-pasting between threads. :oops: I'd say finding a Game Genie or clone would be your best bet then. I'm planning on using a Game Genie in my it'll-be-done-eventually NES portable. Like this Game Genie for $10 shipped, for example: http://www.ebay.com/itm/Nintendo-NES-Ga ... 2eb7cccc1c
So there's no chance that that connector will work? :( I wanted to order one for my NES laptop project but I need to be sure it will work ofcourse... Any other connector that you can order online that would do the trick?

User avatar
jaqiefox
Posts:53
Joined:Tue Sep 13, 2011 8:30 pm
Location:127.0.0.1 (jct cty, OR)
Contact:

Re: NES mod questions (power and regulation, cartridge slot etc)

Post by jaqiefox » Wed Nov 16, 2011 12:01 pm

the spacing is close enough that it should work, and someone else in the thread had stated they got it working fine, so it seems it's close enough to work.
Jaqie Fox, Genuine girl techie | http://foxtecha.com

MichelMoermans
Posts:16
Joined:Sat Jun 18, 2011 2:14 am

Re: NES mod questions (power and regulation, cartridge slot etc)

Post by MichelMoermans » Thu Nov 17, 2011 5:54 am

I'll give it a try then! Hopefully this will not destroy my nes or game!

Post Reply