How make an adapter to on n64 /gamcube using a ps3 usb wired

lemon1mw · Post by **lemon1mw** » Tue Feb 15, 2011 7:37 am

How can make an adopter for the n64/ GameCube that works with either my usb ps3 controller or my usb Logitech pc game controller, I have seen an great many adapter that you can plug a controller to another system , Ex: ps2 controller to Xbox or even GameCube to ps2 console etc.. What I would like to accomplish; I want to build and adapter from scratch parts. Can some out there in cyber land help me I have looked all over the net, with no luck? Sure I can buy off of Amazon or EBay but what the fun in that SOS SOS need help looking for guide to explore the impossible

blaze3927 · Post by **blaze3927** » Tue Feb 15, 2011 4:13 pm

not possible unless you just reshell a ps3/usb controller

lemon1mw · Post by **lemon1mw** » Tue Feb 15, 2011 5:41 pm

ok tell me how, Im intersted in how to do sometjing like this, why your thinking because it would give a good idea to learn

blaze3927 · Post by **blaze3927** » Tue Feb 15, 2011 8:03 pm

okay disassemble your ps3 controller, and get one wire for every button, four wires for the left analog, and one wire for button ground.

remove the right analog, perform the analog to digital mod by removing both the potentiometers, scraping a gap in the lower circle up the top, then reassemble. then take 6 wires and connect them to each pin.

get a project box and a superpad 64.

disassemble the superpad remove all buttons, you need the board only. put the superpad in the box and wire every ps3 button to the corresponding button you want on the superpad.

think that should be it

lemon1mw · Post by **lemon1mw** » Mon Feb 21, 2011 8:52 pm

Thanks for info I finally gotten my hands on some superpads, I have already missed to gamepads is it possible to some pics of what lines Im post rewire please talk to me like im two

blaze3927 · Post by **blaze3927** » Tue Feb 22, 2011 6:49 am

i recommend you use a ps1 or 2 controller for this mod.
disassemble it completely, then do this mod to the right analog stick, if you want the right analog stick to be c buttons/c stick.
http://www.youtube.com/watch?v=iY7c90upP80

i'm doing this mod myself at the moment, ill post some pics tomorrow.

lemon1mw · Post by **lemon1mw** » Tue Feb 22, 2011 5:18 pm

cool dude. our the man, since I have taking the superpad 64 and ps3 controller apart canu still and those pics. If not its cool anyway I just a lot of spare parts Thanks

blaze3927 · Post by **blaze3927** » Wed Mar 09, 2011 8:14 pm

http://forums.benheck.com/viewtopic.php?f=18&t=41936
thats the way i did it^^^

lemon1mw · Post by **lemon1mw** » Wed Mar 09, 2011 9:08 pm

Your awsome, I havent get the cinfugration right, it only a matter of time before I get it.

benheck.com Forums

How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired

Re: How make an adapter to on n64 /gamcube using a ps3 usb wired