364 Worklog
Moderator:Moderators
...I just can't seem to help myself.
Name? Dunno.
This one will have a memory card built in, the RAM swap, RCP wiring, and hopefully somewhere around 4 hours of battery life. The back is a sheet of metal, and that will act as the heatsink. Dimensions are about 3.75x5.5x1.25", with the cart on the back adding another .75 inches. Is it the smallest? Don't know, don't care. I just want to make something functional and attractive. I will be selling this one.
Model before I decided to have the cart on the back, not the top, with DMG for comparison:
This picture is not upside-down, but the cart is. It will slide in from the bottom.
The sweet screen I got, with brightness, contrast, hue, and saturation controls:
Acrylic pieces I cut for the cart cover. I still need to file the last piece to size.
Questions, comments, or ideas?
Name? Dunno.
This one will have a memory card built in, the RAM swap, RCP wiring, and hopefully somewhere around 4 hours of battery life. The back is a sheet of metal, and that will act as the heatsink. Dimensions are about 3.75x5.5x1.25", with the cart on the back adding another .75 inches. Is it the smallest? Don't know, don't care. I just want to make something functional and attractive. I will be selling this one.
Model before I decided to have the cart on the back, not the top, with DMG for comparison:
This picture is not upside-down, but the cart is. It will slide in from the bottom.
The sweet screen I got, with brightness, contrast, hue, and saturation controls:
Acrylic pieces I cut for the cart cover. I still need to file the last piece to size.
Questions, comments, or ideas?
Last edited by Mario on Sun Dec 05, 2010 2:03 pm, edited 1 time in total.
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
Re: I told myself I wouldn't make a thread for this one, but...
looking good man, looking good so far. i would find a way to make an internal controller pak slot, so its not sticking out the back like a lot of other portables.
- evilteddy
- Portablizer
- Posts:423
- Joined:Tue Mar 25, 2008 2:11 am
- 360 GamerTag:Kirren of Smeg
- Steam ID:kizzinator
- Location:Newcastle, Australia
Re: I told myself I wouldn't make a thread for this one, but...
Looks like a cool design. To be honest I am a fan of external cart slots when they're facing downwards. What do you mean by an included memory card?
Re: I told myself I wouldn't make a thread for this one, but...
It's going to be hardwired into the handheld.
-
- Posts:338
- Joined:Fri Jan 16, 2009 1:12 am
Re: I told myself I wouldn't make a thread for this one, but...
you going to use the upside down cart slot to get more room for sholder buttons?
- gamax92
- Posts:289
- Joined:Sat Aug 21, 2010 4:06 pm
- Location:Inside My Nintendo 64 Ram. (Dont Turn It Off!)
- Contact:
Re: I told myself I wouldn't make a thread for this one, but...
You better have a cart lock system when you insert one.
I don't want to be playing Super Mario 64 and have the cart fall out and break on the ground.
Edit: theres a lot of room under the screen... Any ideas to put there?
I don't want to be playing Super Mario 64 and have the cart fall out and break on the ground.
Edit: theres a lot of room under the screen... Any ideas to put there?
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC
I DONT CARE ABOUT POST COUNT.nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
#DCE1E5 #ECECEC
- evilteddy
- Portablizer
- Posts:423
- Joined:Tue Mar 25, 2008 2:11 am
- 360 GamerTag:Kirren of Smeg
- Steam ID:kizzinator
- Location:Newcastle, Australia
Re: I told myself I wouldn't make a thread for this one, but...
Sorry, I read memory card and thought a multimedia memory card for cameras instead of the memory pack.
Re: I told myself I wouldn't make a thread for this one, but...
Diminuendo - Yes, check the third picture. The shoulder buttons are going on the cart slot cover most likely.
Gamax - The cartridge slot holds the cartridge very well. It won't fall out. And just because there's nothing showing outside the case under the screen, doesn't mean there's nothing there inside the case.
Gamax - The cartridge slot holds the cartridge very well. It won't fall out. And just because there's nothing showing outside the case under the screen, doesn't mean there's nothing there inside the case.
- gamax92
- Posts:289
- Joined:Sat Aug 21, 2010 4:06 pm
- Location:Inside My Nintendo 64 Ram. (Dont Turn It Off!)
- Contact:
Re: I told myself I wouldn't make a thread for this one, but...
So what place a logo there or something. its weird to have empty space on the portable.
Edit: that second picture hurts my brain. it a brain teaser.
Edit: that second picture hurts my brain. it a brain teaser.
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC
I DONT CARE ABOUT POST COUNT.nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
#DCE1E5 #ECECEC
Re: I told myself I wouldn't make a thread for this one, but...
I took a yearbook design class, so let me tell you, empty space is just fine if it's strategically placed.
Now, I am going to be using a PSP joystick for this portable. Even for such a small range of motion, they're pretty sensitive, and I have no problem using it like a regular joystick. I had to take one apart to figure out the pins, so I decided to share:
This should work with all 3rd party controllers that use 4 pins for the joystick. I think a lot do this, so, yeah. Even though the variable resistors are 5k, and most joysticks are 10k, they're acting as voltage dividers here and should work fine.
I tested it with my 3rd party controller and it was great.
Now, I am going to be using a PSP joystick for this portable. Even for such a small range of motion, they're pretty sensitive, and I have no problem using it like a regular joystick. I had to take one apart to figure out the pins, so I decided to share:
This should work with all 3rd party controllers that use 4 pins for the joystick. I think a lot do this, so, yeah. Even though the variable resistors are 5k, and most joysticks are 10k, they're acting as voltage dividers here and should work fine.
I tested it with my 3rd party controller and it was great.
- gamax92
- Posts:289
- Joined:Sat Aug 21, 2010 4:06 pm
- Location:Inside My Nintendo 64 Ram. (Dont Turn It Off!)
- Contact:
Re: I told myself I wouldn't make a thread for this one, but...
Soo... That circle thing on the left is where the psp stick will go.
Whats the cirlcle thing on the right?
Whats the cirlcle thing on the right?
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC
I DONT CARE ABOUT POST COUNT.nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
#DCE1E5 #ECECEC
- hailrazer
- Portablizer Extraordinaire
- Posts:2764
- Joined:Mon Jul 10, 2006 8:57 pm
- Location:Georgia Sweet Georgia
Re: I told myself I wouldn't make a thread for this one, but...
C- stick for the c buttons.gamax92 wrote:Soo... That circle thing on the left is where the psp stick will go.
Whats the cirlcle thing on the right?
My Portable Systems:
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
- gamax92
- Posts:289
- Joined:Sat Aug 21, 2010 4:06 pm
- Location:Inside My Nintendo 64 Ram. (Dont Turn It Off!)
- Contact:
Re: I told myself I wouldn't make a thread for this one, but...
then why isn't it yellow. also will you be using a psp stick for that.
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC
I DONT CARE ABOUT POST COUNT.nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
#DCE1E5 #ECECEC
- hailrazer
- Portablizer Extraordinaire
- Posts:2764
- Joined:Mon Jul 10, 2006 8:57 pm
- Location:Georgia Sweet Georgia
Re: I told myself I wouldn't make a thread for this one, but...
None of the buttons are colored. I assume he just didn't add color to the drawing.gamax92 wrote:then why isn't it yellow. also will you be using a psp stick for that.
My Portable Systems:
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
- gamax92
- Posts:289
- Joined:Sat Aug 21, 2010 4:06 pm
- Location:Inside My Nintendo 64 Ram. (Dont Turn It Off!)
- Contact:
Re: I told myself I wouldn't make a thread for this one, but...
The red buttons and the green screen is colered.hailrazer wrote:None of the buttons are colored. I assume he just didn't add color to the drawing.gamax92 wrote:then why isn't it yellow. also will you be using a psp stick for that.
would it be even possible to use a psp stick for the c-stick.
I DONT CARE ABOUT POST COUNT.
#DCE1E5 #ECECEC
I DONT CARE ABOUT POST COUNT.nevermind1534 wrote:By, I cringe every time I see a post by you, because of the immense number of useless comments that seem to be there for no reason other than to up your post count.
#DCE1E5 #ECECEC