Traces
Moderator:Moderators
- hidiosoman
- Posts:88
- Joined:Fri Jan 08, 2010 8:44 pm
Re: Traces
Posted by EVIL NOD on moddedbybacteria:
The black wires up top are what you need to relocate 12v. The red wire is for 3.3v if you cut more than what is shown.
Oh, and that middle place that it connects to is the green. Scrape some green away and solder it there.
Source: http://moddedbybacteria.freeforums.org/ ... d-t82.html" onclick="window.open(this.href);return false;
The black wires up top are what you need to relocate 12v. The red wire is for 3.3v if you cut more than what is shown.
Oh, and that middle place that it connects to is the green. Scrape some green away and solder it there.
Source: http://moddedbybacteria.freeforums.org/ ... d-t82.html" onclick="window.open(this.href);return false;
Re: Traces
you only need to wire the 12v line to the regulator and the 3.3v to the trace ground to ground
Re: Traces
Thanks for the pic but now im confused! A few posts down it says to solder 12v directly to the board. Help?
Re: Traces
just solder it to the 5v regulator
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact: