How do you take the controller ports out ?
Just so its a empty shell.
Controller Ports, take out.
Moderator: Moderators
- TomKStones
- Posts: 132
- Joined: Sun Jun 13, 2010 5:41 am
- 360 GamerTag: TomKStones
- Location: Australia
- gannon
- Moderator
- Posts: 6974
- Joined: Sun Apr 04, 2004 4:48 pm
- Location: Near that one big lake
- Contact:
Re: Controller Ports, take out.
Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
- eagle5953
- Moderator
- Posts: 1892
- Joined: Mon Jul 07, 2008 5:06 pm
- 360 GamerTag: eagle5953
- Steam ID: eagle5953
- Contact:
Re: Controller Ports, take out.
Sounds correct to me.gannon wrote:Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
- TomKStones
- Posts: 132
- Joined: Sun Jun 13, 2010 5:41 am
- 360 GamerTag: TomKStones
- Location: Australia
Re: Controller Ports, take out.
So I'd need to un-solder them right?gannon wrote:Regular toaster NES? IIRC you just unscrew the black cover and pull them out after unplugging them from the board, but I haven't done this in awhile and may be wrong.
- WhatULive4
- Posts: 329
- Joined: Fri Mar 28, 2008 6:19 pm
- Location: Saskatchewan, Canada
Re: Controller Ports, take out.
No desoldering needed. They are connected to the board with a plug. All you need to do is take a few screws out, and they come right out. I'm curious why you need to know this. It would have only taken a few minutes to pop the top on your console to get these answers.