Of course he is.hailrazer wrote:Probably means its a good rule and should be followed then. LOLBasement_Modder wrote: That particular rule has been in existence since there were less that 100 members here.
Hey and can we get an update Zen........you trying to build anticipation ?
GCPv1 Clone Worklog Done!!
Moderator:Moderators
- Basement_Modder
- Portablizer
- Posts:962
- Joined:Sun Aug 24, 2008 7:16 am
- Location:Next door to my neighbor
- Contact:
Cheers,
Basement_Modder
_________________
Basement_Modder
_________________
Re: GCPv1 Clone - Commission [Sneak peak]
Stuffing it with all the parts. I'll post a couple of pic later today
Interested in more of my projects?? Check my facebook page:
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
Re: GCPv1 Clone - Commission [Sneak peak]
Here's a little update. Back part is holding battery's L and R buttons and gamecube mobo with laser. Everything is working properly.
The front part is also almost done. Pics will follow soon!!
The front part is also almost done. Pics will follow soon!!
Interested in more of my projects?? Check my facebook page:
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
Re: GCPv1 Clone - Commission [Sneak peak]
Nice work Zenloc!!!! So what did you do to get the PS2 fan working??? Oh, and I will be shipping out that PAL screen & mobo on Tuesday (I think the post office is closed tomorrow for Memorial Day).
This thing looks awesome tho! Very organized. Oh and fyi, you can replace the right motor (the one that controls the laser movements) with a CD motor to reduce the height. It will still work fine. Just in case you need to
This thing looks awesome tho! Very organized. Oh and fyi, you can replace the right motor (the one that controls the laser movements) with a CD motor to reduce the height. It will still work fine. Just in case you need to
- limpport
- Senior Member
- Posts:1873
- Joined:Sun Jan 29, 2006 12:32 pm
- Location:(the only person here from) Vermont
- Contact:
Re: GCPv1 Clone - Commission [Sneak peak]
The news section wasn't around when there were 100 people here...Basement_Modder wrote: That particular rule has been in existence since there were less that 100 members here.
About how thick is it on the sides (where you hold it)?
Re: GCPv1 Clone - Commission [Sneak peak]
Thickness is 5cm on the sides and 6cm in the middle with the discdrive.
I could get it smaller and thinner if I wanted to but to get some practical battery life this thickness was needed.
Also I couldn't get the fan working so I modded a 5v fan from a wii into the ps2 fan and it works!! Just look at how the fan looks a bit odd in the pics above.
@ Tchay: Perfect!! let me know when you have sent it As for the drive motor with what kind of motor did you replace it?? Pics?
I could get it smaller and thinner if I wanted to but to get some practical battery life this thickness was needed.
Also I couldn't get the fan working so I modded a 5v fan from a wii into the ps2 fan and it works!! Just look at how the fan looks a bit odd in the pics above.
@ Tchay: Perfect!! let me know when you have sent it As for the drive motor with what kind of motor did you replace it?? Pics?
Interested in more of my projects?? Check my facebook page:
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
Re: GCPv1 Clone - Commission [Sneak peak]
I'll dig up some old posts
Any CD motor should work just fine. Considering that CD motors spin non-stop for long periods of time, while the laser motor only spins occasionally for disc reading, CD motors will have no problem handling the laser. I've tested it on several Gamecube disc drives and played games for hours without problems.
Obviously, this motor is only slightly less tall. BUT, there are CD motors out there that are half the size of the normal Gamecube motor. Which is pretty handy
Getting the screw holes to line up on the motor took a little persuasion but wasn't too tricky.
Any CD motor should work just fine. Considering that CD motors spin non-stop for long periods of time, while the laser motor only spins occasionally for disc reading, CD motors will have no problem handling the laser. I've tested it on several Gamecube disc drives and played games for hours without problems.
Obviously, this motor is only slightly less tall. BUT, there are CD motors out there that are half the size of the normal Gamecube motor. Which is pretty handy
Getting the screw holes to line up on the motor took a little persuasion but wasn't too tricky.
Re: GCPv1 Clone - Commission [Sneak peak]
......That is sexy! I can has?
Anybody know where I can get a laser doodle in the UK?
-PM me!
-PM me!
- sonic4freedom
- Portablizer
- Posts:158
- Joined:Sat Jan 26, 2008 7:54 am
- Location:burlington NJ, US
- Contact:
Re: GCPv1 Clone - Commission [Sneak peak]
Ajezard2 wrote:......That is sexy! I can has?
Anyway, Zenloc, you, like many others, are just pure amazing. Your case work is just flawless and your enthusiasm for portablizing always puts a smile on my face. Thanks man and hope you stay with us for many years to come. Don't stop impressing us
SS I miss your old Profile PicturesShockSlayer wrote:Jarate ftw. Shards of glass in your eyes, piss all over you, and someone is about to kill you. What a way to die.
-----------------
The Rising Portablizer
Re: GCPv1 Clone - Commission [Sneak peak]
Thnx many more portables to come.
Interested in more of my projects?? Check my facebook page:
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
-
- Posts:53
- Joined:Wed Feb 10, 2010 2:30 pm
Re: GCPv1 Clone - Commission [Sneak peak]
Looks great! Hope you can finish this one soon; I can't wait to see the end result
Re: GCPv1 Clone - Commission [Sneak peak]
Another little update:
Almost done with all the wiring. After that it's time to screw it together
Almost done with all the wiring. After that it's time to screw it together
Interested in more of my projects?? Check my facebook page:
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
- The Smooth
- Posts:170
- Joined:Sun Apr 25, 2010 2:19 am
Re: GCPv1 Clone - Commission [Sneak peak]
Looking good zenloc
Let's just say my portable has got loads of win!!! *hint *hint
Transformice is so addictive!
Transformice is so addictive!
Re: GCPv1 Clone - Commission [Sneak peak]
Any pictures of your form molds?
[url=http://thekevbot.com]Portfolio[/url]
[url=http://twitter.com/thekevbot]Twitter[/url]
[url=http://blog.thekevbot.com]Blog[/url]
[url=http://twitter.com/thekevbot]Twitter[/url]
[url=http://blog.thekevbot.com]Blog[/url]
Re: GCPv1 Clone - Commission [Sneak peak]
This case wasn't made with any molds It is a frankencase made case from a gamegear case.
Interested in more of my projects?? Check my facebook page:
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.
http://www.facebook.com/profile.php?id=100001843721188" onclick="window.open(this.href);return false;
Or email me at loctronics@gmail.com with your request.