The Nitro 64 (geno whirl's N64 portable worklog)
Moderator:Moderators
- bentendo64
- Posts:163
- Joined:Tue Nov 10, 2009 7:22 pm
- Location:Tinysota
I use that Mighty Putty stuff, but made by locktite. I think its expensive, $4 per tube, I get it at Wal Mart, or something like that..
http://bentendo64.co.cc/" onclick="window.open(this.href);return false;
"Mmm, extra performance for free. The essence of overclocking."
"Mmm, extra performance for free. The essence of overclocking."
- nachoz12341
- Posts:124
- Joined:Thu Dec 17, 2009 4:04 pm
Re: The Nitro 64 (geno whirl's N64 portable worklog)
i use bondo and it works well one thing though make sure you get the right kind there is a pic on my topic 3 pagish i think
- geno whirl
- Posts:115
- Joined:Tue Jun 23, 2009 3:23 pm
- Location:About 40 miles from Nowhere
Re: The Nitro 64 (geno whirl's N64 portable worklog)
Bumpity bump
I have recently come into some money so I will now be able to buy a dremel and a new tip for my soldering iron! Finally!
I was thinking about this dremel from Ace Hardware
Is that one good, if anyone knows?
I might move this to modretro
I have recently come into some money so I will now be able to buy a dremel and a new tip for my soldering iron! Finally!
I was thinking about this dremel from Ace Hardware
Is that one good, if anyone knows?
I might move this to modretro
argelfraster wrote:Designer noob wrote:umm, well that sucks. I was going to buy one for my next portable (After, my WIV) and then franklin case it.
Frankencase.
Re: The Nitro 64 (geno whirl's N64 portable worklog)
That looks like the dremel I use; it works very well No need to "move" it, but you can certainly have it on both
- geno whirl
- Posts:115
- Joined:Tue Jun 23, 2009 3:23 pm
- Location:About 40 miles from Nowhere
Re: The Nitro 64 (geno whirl's N64 portable worklog)
I went to Ace and the only one they had was one with a box already open, so I got the 300 series model. 24 attachments, variable speed, and other awesome stuff. I also went to my local used video game store to use up a few gift cards I had and i got Pokemon Stadium.
argelfraster wrote:Designer noob wrote:umm, well that sucks. I was going to buy one for my next portable (After, my WIV) and then franklin case it.
Frankencase.
- geno whirl
- Posts:115
- Joined:Tue Jun 23, 2009 3:23 pm
- Location:About 40 miles from Nowhere
Re: The Nitro 64 (geno whirl's N64 portable worklog)
IT'S ALIVE! MUAHAHAHAHAHA!
So I finally got everything wired up to the battery. I re-relocated the cartridge slot with new wires (the old ones didn't bend very well. the ones i am using now are the computer ones that everyone uses), wired up the screen to the battery, and also cut down the boards so they would fit in the case. There looks like there might be a bit of distortion in video and audio, so i will probably have to use bigger wire, but i just don't see how I could squeeze on anything bigger than that computer wire. Also, I know it can be trimmed down quite a bit, but just how much of the jumper pack can i cut off?
So I finally got everything wired up to the battery. I re-relocated the cartridge slot with new wires (the old ones didn't bend very well. the ones i am using now are the computer ones that everyone uses), wired up the screen to the battery, and also cut down the boards so they would fit in the case. There looks like there might be a bit of distortion in video and audio, so i will probably have to use bigger wire, but i just don't see how I could squeeze on anything bigger than that computer wire. Also, I know it can be trimmed down quite a bit, but just how much of the jumper pack can i cut off?
argelfraster wrote:Designer noob wrote:umm, well that sucks. I was going to buy one for my next portable (After, my WIV) and then franklin case it.
Frankencase.
- nachoz12341
- Posts:124
- Joined:Thu Dec 17, 2009 4:04 pm
Re: The Nitro 64 (geno whirl's N64 portable worklog)
http://kyorune.com/modding/article.php?id=53" onclick="window.open(this.href);return false;
- geno whirl
- Posts:115
- Joined:Tue Jun 23, 2009 3:23 pm
- Location:About 40 miles from Nowhere
Re: The Nitro 64 (geno whirl's N64 portable worklog)
Why thank you. Also, I just lost the game. Thanks
argelfraster wrote:Designer noob wrote:umm, well that sucks. I was going to buy one for my next portable (After, my WIV) and then franklin case it.
Frankencase.
Re: The Nitro 64 (geno whirl's N64 portable worklog)
zeturi wrote:If you're getting 404'd when trying to use the links in stickies, try this tutorial to find that juicy info.
Re: The Nitro 64 (geno whirl's N64 portable worklog)
That's no ram transplant.
- limpport
- Senior Member
- Posts:1873
- Joined:Sun Jan 29, 2006 12:32 pm
- Location:(the only person here from) Vermont
- Contact:
Re: The Nitro 64 (geno whirl's N64 portable worklog)
He's a copycatgeno whirl wrote:Why thank you. Also, I just lost the game. Thanks
Re: The Nitro 64 (geno whirl's N64 portable worklog)
Then it has no expansion pack (I need to quit assuming )neverused wrote:That's no ram transplant.
- geno whirl
- Posts:115
- Joined:Tue Jun 23, 2009 3:23 pm
- Location:About 40 miles from Nowhere
Re: The Nitro 64 (geno whirl's N64 portable worklog)
That is a little more complicated than I would like to do, but thanks anyway. for the connections to the screen, could I use a small bit of small wire and the rest could be 22-gauge, or would it not even help and I would only be creating more work for myself?
I like thatSpoiler:
argelfraster wrote:Designer noob wrote:umm, well that sucks. I was going to buy one for my next portable (After, my WIV) and then franklin case it.
Frankencase.
Re: The Nitro 64 (geno whirl's N64 portable worklog)
You can use something like IDE wire or bigger, smaller, whatever to make your connections to your screen. Controller wire works very well from what I've experienced Power does need to be about 22 gauge, but that's the only thing that does.