Quest. About led mod
Moderator: Moderators
-
GamecubePerson111
- Posts: 59
- Joined: Wed Dec 16, 2009 8:06 pm
Quest. About led mod
Hi I just led modded my psone screen and it is very bright without the LCDs ribbon cable in place. However, when I place the LCD ribbon cable in the clamp, the screen becomes very very dim. Does anyone know of a way I can brighten the screen while the LCD is connected?
-
hailrazer
- Portablizer Extraordinaire
- Posts: 2764
- Joined: Mon Jul 10, 2006 8:57 pm
- Location: Georgia Sweet Georgia
Re: Quest. About led mod
Thats because an Lcd when powered on blocks around 90%-95% of the backlight.
You can always do the brightness mod
You can always do the brightness mod
My Portable Systems:
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-
GamecubePerson111
- Posts: 59
- Joined: Wed Dec 16, 2009 8:06 pm
Re: Quest. About led mod
I actaully tried that, the screen got brighter but the Color was only black and white from my GC. But the volume and brightness controls were still green so I'm not sure what happened I think the component (CV24) was accidentally desoldered. I soldered it back on, (very difficult) but still only black and white, not sure what happened.