Antiglare mod

[GamecubePerson111]

I've been having some trouble with anti glare modding my psone screen. I was able to peel it off very easily except a piece of it ripped and stayed connected to the polarizer. I tried getting it off, I even resoaked the little piece of antiglare filter on the screen but it won't budge. Any suggestions or help would be awesome, Thanks.

[Kyo]

Maybe someone who borked their screen board will sell you the LCD?

Probably not the answer you were looking for, though.

[hailrazer]

It can be removed with a resoak of about 20 minutes over just that spot, but it might leave a smudge now.

You will have to get an edge of it up with a razor blade. Be VERY careful and pick the edge up without hitting the polarizer beneath it.

[thewise1]

I tried to do this with a broken screen and it didn't soak long enough. There were lines of adhesive left but it came off really easy with some windex.

[GamecubePerson111]

I actually have lifted up a little more of the polarizer because the piece that is stuck is on a corner, but I'll try the windex. Also I got a few smudges on the screen, is there anyway to remove them?

[GamecubePerson111]

It did not work, it is really stuck on the screen good, not sure what to do now, just leave it?