And thanks to a site that I recently left, VGDC (Videogame Directors Cuts) Forums, Weegee is everywhere. My friend Railer61 even made several Weegee memes.kibble wrote:Your comment cracked me up!snowpenguin wrote:Your... avatar... it's so weird.... Is it luigi upside down? Cause I always see it as some weird pirate dude with a green mustachio and beard who has a weird bump on his head the size of a large nose.
There's your answer.
Do we have room for another N64P? (t64 WIP)
Moderator:Moderators
- Knux the Fox
- Posts:26
- Joined:Fri Aug 08, 2008 3:54 pm
- Steam ID:knuxthefox
- Location:Lincoln, IL
- Contact:
- Knux the Fox
- Posts:26
- Joined:Fri Aug 08, 2008 3:54 pm
- Steam ID:knuxthefox
- Location:Lincoln, IL
- Contact:
Re: Do we have room for another N64P? (t64 WIP)
Okay...it took me a couple days during my free-time to catch up on this thread. I'm very impressed with your work, kibble. I'm eagerly awaiting what you have in store these next couple months. I hope you finish and everything works properly, then maybe work on negotiating contracts with those board makers, and chip makers, and component providers, etc. to start producing these boards for resale. As I'd probably be sitting a bit better financially by that point (I'm guessing next Spring? Maybe Summer?) I'd certainly consider buying a board. I'm sure everyone on this forum are drooling over your much improved and much smaller n64 board. I'm particularly pleased with the integrated memory which adds compatibility for games that require an expansion pak, such as Perfect Dark and Donkey Kong 64, and others that are enhanced by the EP, such as Rush 2049, which let's face it, if you're not playing with an EP, you're not playing the full game.
As of right now, I'm just a gamer, not a modder, but I did order a gamebit to take apart my SNES, with intent to bleach the casing to get the years of staining out of it and to generally clean everything up. I was considering doing a casemod, especially if i can fit everything into a European SNES casing without much hassle, and if I could get ahold of one for said casing. Anyways. "This is ROB64. Keep up the good work!"
As of right now, I'm just a gamer, not a modder, but I did order a gamebit to take apart my SNES, with intent to bleach the casing to get the years of staining out of it and to generally clean everything up. I was considering doing a casemod, especially if i can fit everything into a European SNES casing without much hassle, and if I could get ahold of one for said casing. Anyways. "This is ROB64. Keep up the good work!"
Re: Do we have room for another N64P? (t64 WIP)
digikey has SCREENS?!?!kibble wrote:that screen I want to order from DigiKey.
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
Re: Do we have room for another N64P? (t64 WIP)
yeah, where have you been?mako321 wrote:digikey has SCREENS?!?!kibble wrote:that screen I want to order from DigiKey.
Re: Do we have room for another N64P? (t64 WIP)
at school.
links pleezey?
links pleezey?
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
Re: Do we have room for another N64P? (t64 WIP)
theyre digital interface screens. not really usable unless you can figure out a driver circuit for them.mako321 wrote:at school.
links pleezey?
- Designer noob
- Posts:171
- Joined:Tue Apr 14, 2009 12:12 am
Re: Do we have room for another N64P? (t64 WIP)
I am just curious how old are you? Is your major in electronics or are you just like a super genious.
Also, can any-one point me to a guide on how to make circuit boars like that? How do you mka the traces so, small machine? My hands shake just trying to make a straight line.
Also, can any-one point me to a guide on how to make circuit boars like that? How do you mka the traces so, small machine? My hands shake just trying to make a straight line.
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
Re: Do we have room for another N64P? (t64 WIP)
Designer noob wrote:I am just curious how old are you? Is your major in electronics or are you just like a super genious.
Also, can any-one point me to a guide on how to make circuit boars like that? How do you mka the traces so, small machine? My hands shake just trying to make a straight line.
read back, he explains it.
- Designer noob
- Posts:171
- Joined:Tue Apr 14, 2009 12:12 am
Re: Do we have room for another N64P? (t64 WIP)
theres 22 pages can you guide me to ruffly what page? I don't have 2 hours to read through this.
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
Re: Do we have room for another N64P? (t64 WIP)
somewhere between 1 and 21Designer noob wrote:theres 22 pages can you guide me to ruffly what page? I don't have 2 hours to read through this.
- Designer noob
- Posts:171
- Joined:Tue Apr 14, 2009 12:12 am
- evilteddy
- Portablizer
- Posts:423
- Joined:Tue Mar 25, 2008 2:11 am
- 360 GamerTag:Kirren of Smeg
- Steam ID:kizzinator
- Location:Newcastle, Australia
Re: Do we have room for another N64P? (t64 WIP)
He's printing onto transperancies and using photo resist circuit boards. If you know how to do it well
you can get excellent results as can be seen in Kibble's work. If you want to use them yourself they
should be available at your local jaycar or country equivalent.
you can get excellent results as can be seen in Kibble's work. If you want to use them yourself they
should be available at your local jaycar or country equivalent.
- Designer noob
- Posts:171
- Joined:Tue Apr 14, 2009 12:12 am
Re: Do we have room for another N64P? (t64 WIP)
last question, how much do the tools usually cost to this kind of work.
- dragonhead
- Posts:952
- Joined:Sun Apr 04, 2004 4:28 pm
- Location:NH, USA
- Contact:
Re: Do we have room for another N64P? (t64 WIP)
http://tinyurl.com/ylje8rz" onclick="window.open(this.href);return false;Designer noob wrote:last question, how much do the tools usually cost to this kind of work.
- Designer noob
- Posts:171
- Joined:Tue Apr 14, 2009 12:12 am