OK, so I'm finally done with class for the summer so I have some more time and I want to re-cap my Game Gears as they are quickly nearing death (they switch themselves off if you don't turn the brightness all the way down and wait a few seconds before turning it up). I know there's a how-to online listing the capacitors, but I don't know very much about the industrial availability of capacitors. Do capacitors of the same capacitance come in different sizes? How will I know if I am ordering capacitors that will physically fit when I put the case back together? If someone could help inform me on the ins and outs of buying capacitors for this job, I would greatly appreciate it. I've done plenty of soldering so that won't be a problem, and I have 2 game gears (one with a bum d-pad) so I can afford to mess up one in a worst-case scenario.
this is the how-to if you want to know what I'm talking about:
http://members.optusnet.com.au/eviltim/ ... epair.html" onclick="window.open(this.href);return false;
Game Gear Capacitors
Moderator:Moderators
-
- Senior Member
- Posts:1977
- Joined:Fri Feb 06, 2009 1:36 pm
- Steam ID:nevermind1534
- Location:Detroit, MI
- Contact:
Re: Game Gear Capacitors
They do come in different sizes. You'll know if you measure them.17daysolderthannes wrote:OK, so I'm finally done with class for the summer so I have some more time and I want to re-cap my Game Gears as they are quickly nearing death (they switch themselves off if you don't turn the brightness all the way down and wait a few seconds before turning it up). I know there's a how-to online listing the capacitors, but I don't know very much about the industrial availability of capacitors. Do capacitors of the same capacitance come in different sizes? How will I know if I am ordering capacitors that will physically fit when I put the case back together? If someone could help inform me on the ins and outs of buying capacitors for this job, I would greatly appreciate it. I've done plenty of soldering so that won't be a problem, and I have 2 game gears (one with a bum d-pad) so I can afford to mess up one in a worst-case scenario.
this is the how-to if you want to know what I'm talking about:
http://members.optusnet.com.au/eviltim/ ... epair.html" onclick="window.open(this.href);return false;
Kyo wrote:"does anyone here know how to fly a plane?"
"STAND BACK EVERYBODY, I HAVE A FAKE ID"
-
- Posts:381
- Joined:Thu Oct 18, 2007 7:15 am
Re: Game Gear Capacitors
ok, that doesn't really help me. There's no place to buy them locally as Radio Shack pretty much sells 4 or 5 types individually or a multi pack comprised of mostly ceramic capacitors that still probably won't have what I need. The question here is how to go about ordering these online to get capacitors that will do the job (and last longer than the factory crap) and also fit within the limitations of the case.nevermind1534 wrote:They do come in different sizes. You'll know if you measure them.17daysolderthannes wrote:OK, so I'm finally done with class for the summer so I have some more time and I want to re-cap my Game Gears as they are quickly nearing death (they switch themselves off if you don't turn the brightness all the way down and wait a few seconds before turning it up). I know there's a how-to online listing the capacitors, but I don't know very much about the industrial availability of capacitors. Do capacitors of the same capacitance come in different sizes? How will I know if I am ordering capacitors that will physically fit when I put the case back together? If someone could help inform me on the ins and outs of buying capacitors for this job, I would greatly appreciate it. I've done plenty of soldering so that won't be a problem, and I have 2 game gears (one with a bum d-pad) so I can afford to mess up one in a worst-case scenario.
this is the how-to if you want to know what I'm talking about:
http://members.optusnet.com.au/eviltim/ ... epair.html" onclick="window.open(this.href);return false;
- Tibia
- Posts:1319
- Joined:Thu Feb 28, 2008 2:02 pm
- PSN Username:Tibia1013
- Steam ID:Mulder101361
- Location:Istanbul, not Constantinople
- Contact:
Re: Game Gear Capacitors
I sat down with an open GG and used the voltage and capacitance rating to order equivalents off of Mouser.com. A higher voltage will work, its the uf number that absolutely must match. I prefer to use regular through-hole radial mount ones. There's tons of room in the GG case.
I'm going to strongly recommend leaving the old ones in until you get the new ones. Then, you can replace them one at a time, taking careful note of what's positive and negative. The old caps are clearly marked near the bottom with a + and -. The ones I use have a white band on the negative side.
I doubt very much you're going to find the correct sizes at Radio Shak. They have a very small selection, and some of the GG caps are uncommon sizes.
I'm going to strongly recommend leaving the old ones in until you get the new ones. Then, you can replace them one at a time, taking careful note of what's positive and negative. The old caps are clearly marked near the bottom with a + and -. The ones I use have a white band on the negative side.
I doubt very much you're going to find the correct sizes at Radio Shak. They have a very small selection, and some of the GG caps are uncommon sizes.
This post brought to you by David Duchovny's glorious nipples.
-
- Senior Member
- Posts:1977
- Joined:Fri Feb 06, 2009 1:36 pm
- Steam ID:nevermind1534
- Location:Detroit, MI
- Contact:
Re: Game Gear Capacitors
newark.com has a HUGE selection. For caps, you'll have to pay a nice flat handling fee, though.
Kyo wrote:"does anyone here know how to fly a plane?"
"STAND BACK EVERYBODY, I HAVE A FAKE ID"
-
- Posts:381
- Joined:Thu Oct 18, 2007 7:15 am
Re: Game Gear Capacitors
well that's fine, I'm expecting to spend about $15 per game gear at least.nevermind1534 wrote:newark.com has a HUGE selection. For caps, you'll have to pay a nice flat handling fee, though.
- Rekarp
- Portablizer Extraordinaire
- Posts:2163
- Joined:Thu Dec 28, 2006 1:52 am
- PSN Username:Lnghrn_
- Steam ID:rekarp
- Location:Austin, Tx
- Contact:
Re: Game Gear Capacitors
mouser.com
No handling fees.
No handling fees.
Re: Game Gear Capacitors
How is this coming along?
If you haven't already ordered the parts, you can get the capacitors from any waste piece of electronics (VCRs, CD/DVD players, etc.) You just need to make sure that the capacitance (measured in uf, as in 100uf for isntance) is the same as the existing capacitor. The voltage needs to meet or exceed the existing capacitor's rating, it CAN NOT be less, but can be rated much higher. Watch the size; if you get one that's too tall you'll need to lay them down so that the case will close.
It's an easy-peezy repair, especially as you've had experience soldering.
If you haven't already ordered the parts, you can get the capacitors from any waste piece of electronics (VCRs, CD/DVD players, etc.) You just need to make sure that the capacitance (measured in uf, as in 100uf for isntance) is the same as the existing capacitor. The voltage needs to meet or exceed the existing capacitor's rating, it CAN NOT be less, but can be rated much higher. Watch the size; if you get one that's too tall you'll need to lay them down so that the case will close.
It's an easy-peezy repair, especially as you've had experience soldering.