Making the xbox DVD drive smaller.... why not?

Discuss LEGAL mods for your game systems, and turning them into portables!

Moderator: Moderators

Post Reply
WackHacker
Posts: 1
Joined: Wed Apr 08, 2009 2:43 am

Making the xbox DVD drive smaller.... why not?

Post by WackHacker »

So first of I'm new blah blah this is my first post blah blah (insert other stuff you don't care to hear)

On to the subject.

Now we are all hackers or some of you are aspiring hackers and the whole point of being a hacker is to push things to the limit. I have heard a lot of people say that Ben making the xbox into a laptop is impossible and that almost no one can do it. I think right off the bat that's a load of BS. Even Ben says it's really not that hard. I also think that we can push the laptop even further, in fact I know we can.

The one thing that is holding the case back of every xbox portable/laptop I have seen from being small enough to look good is the damn dvd drive. COME ON GUYS WE CAN MAKE IT SMALLER! If we can cut down the dvd drive by a 1/2 inch in height it will make the laptop look so much better! :)

I'm sure most of you have seen RDC's Slot loading DVD drive.

http://forums.xbox-scene.com/index.php? ... 66828&st=0

He mashed up the components of a Mac slot loader to carry the heart of the xbox dvd drive and in its construction there was a working model no bigger than a laptop drive. As a matter of fact, on that note, why not make a slot loader on the xbox laptop? Why has no one done this yet is my question. We have RDC's project documented and we know how he did it. Maybe I'm just dreaming but I for sure think it would be amazing to see.
palmertech
Senior Member
Posts: 3225
Joined: Sat Feb 02, 2008 1:40 am
Location: California, land of the homeless and hippies

Re: Making the xbox DVD drive smaller.... why not?

Post by palmertech »

Why have we not done it?

1. Because nobody cares enough about the original xbox anymore to pay someone for the time to make it, and the people who CAN make it do not want one for themselves.

2. Nobody said it could not be done, people HAVE made xbox laptops.

3. Slimming the DVD drive does nothing, most people lay it alongside the motherboard, and the case has to be pretty large to fit a screen anyways.

3. If you really want the space savings, why mess with a disc drive when you can use a 2.5" laptop drive?

4. Not to sound mean, but until you have actually contributed, I am not sure if you count as part of the "we" you keep speaking of. ;) Right now, you are just pointing out something WE could do, but I do not think you bring any new skills to the table.
Image

Excellent
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: Making the xbox DVD drive smaller.... why not?

Post by eagle5953 »

Palmer, I think he means XBox 360, not original XBox.
palmertech
Senior Member
Posts: 3225
Joined: Sat Feb 02, 2008 1:40 am
Location: California, land of the homeless and hippies

Re: Making the xbox DVD drive smaller.... why not?

Post by palmertech »

In that case, a lot of my points still stand. The DVD drive is not the reason for the thickness, slimming it would do little to make one slimmer. Airflow is a huge factor here, the last few 360 laptops made by members here had problems with overheating, even with fairly large cases. You can simply not slim the case down anymore without overheating the 360.

Oh, and the only reason it is "impossible" is the case. Taking a 360 out of the case, and wiring it to an LCD moniter is not hard, it IS very easy. But without access to a full fledged CNC shop, hundreds of dollars, and tens of hours devoted to the case, all you have is a bunch of parts out on your workshop table.
Image

Excellent
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: Making the xbox DVD drive smaller.... why not?

Post by eagle5953 »

Good points, Palmer! I couldn't word it so succinctly.

LOL @ using "we" in his very first post.
DopestKidEva
Posts: 115
Joined: Sat Feb 21, 2009 8:12 pm
PSN Username: dopestkideva

Re: Making the xbox DVD drive smaller.... why not?

Post by DopestKidEva »

maybe he has modded something b4.I hate how people on this forum put new people down and make them feel like they cant do crap.
jjhammerstein wrote:I'm going to hunt you down and rape you forever.
samjc3
Posts: 1086
Joined: Sun Feb 15, 2009 8:05 pm
Steam ID: samjc3
Location: burning and pillaging!!

Re: Making the xbox DVD drive smaller.... why not?

Post by samjc3 »

DopestKidEva wrote:maybe he has modded something b4.I hate how people on this forum put new people down and make them feel like they cant do crap.
they dont. all they do is:

1. point out valid indisputable facts.

2. point out that the new person has done nothing (that any of us know about) that would prepare them to do what they want to.

3. give useful advice.


nobody gets flamed unless they make a stupid claim, with no proof, and flip at people who tell them its impossible. like the taco64 guy, and the ps2 phat in a psp case guy, and countless others.
AfroLH wrote:
HotDog-Cart wrote: Also, the codename stuff adds a little bit of sexyness, in my eyes.
Yeah well Alcohol adds a little bit of sexyness in my eyes, but I dont drink it all the time. :wink:
SpongeBuell wrote:As proof, I offer this picture of a monkey on my head.
DopestKidEva
Posts: 115
Joined: Sat Feb 21, 2009 8:12 pm
PSN Username: dopestkideva

Re: Making the xbox DVD drive smaller.... why not?

Post by DopestKidEva »

samjc3 wrote:
DopestKidEva wrote:maybe he has modded something b4.I hate how people on this forum put new people down and make them feel like they cant do crap.
they dont. all they do is:

1. point out valid indisputable facts.

2. point out that the new person has done nothing (that any of us know about) that would prepare them to do what they want to.

3. give useful advice.


nobody gets flamed unless they make a stupid claim, with no proof, and flip at people who tell them its impossible. like the taco64 guy, and the ps2 phat in a psp case guy, and countless others.
so y is so funny if he said we in his first post he said we modders so maybe he has made something
jjhammerstein wrote:I'm going to hunt you down and rape you forever.
DopestKidEva
Posts: 115
Joined: Sat Feb 21, 2009 8:12 pm
PSN Username: dopestkideva

Re: Making the xbox DVD drive smaller.... why not?

Post by DopestKidEva »

DopestKidEva wrote:
samjc3 wrote:
DopestKidEva wrote:maybe he has modded something b4.I hate how people on this forum put new people down and make them feel like they cant do crap.
they dont. all they do is:

1. point out valid indisputable facts.

2. point out that the new person has done nothing (that any of us know about) that would prepare them to do what they want to.

3. give useful advice.


nobody gets flamed unless they make a stupid claim, with no proof, and flip at people who tell them its impossible. like the taco64 guy, and the ps2 phat in a psp case guy, and countless others.
so y is so funny if he said we in his first post he said we hackers so maybe he has made something
jjhammerstein wrote:I'm going to hunt you down and rape you forever.
palmertech
Senior Member
Posts: 3225
Joined: Sat Feb 02, 2008 1:40 am
Location: California, land of the homeless and hippies

Re: Making the xbox DVD drive smaller.... why not?

Post by palmertech »

If he has, then he should post it. If we assumed that every random person happens to be an awesome modder... Well, these forums would be filled with pretty gullible people, eh? :wink:

I never put him down, I just pointed out the flaws in the plan.
Image

Excellent
eurddrue
Senior Member
Posts: 2367
Joined: Fri Jul 18, 2008 1:26 pm
Location: I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch

Re: Making the xbox DVD drive smaller.... why not?

Post by eurddrue »

palmertech wrote: every random person happens to be an awesome modder...
Well, there was that guy who built the portable n64 and hadn't registered...
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe
I think we should check to see if you can withstand 220 volts
samjc3
Posts: 1086
Joined: Sun Feb 15, 2009 8:05 pm
Steam ID: samjc3
Location: burning and pillaging!!

Re: Making the xbox DVD drive smaller.... why not?

Post by samjc3 »

eurddrue wrote:
palmertech wrote: every random person happens to be an awesome modder...
Well, there was that guy who built the portable n64 and hadn't registered...
true, but he is only 1 guy. and there are probably 4000 profiles that belong to noobs, that have never posted again since they realized whatever they wanted to do wasnt going to be easy.
AfroLH wrote:
HotDog-Cart wrote: Also, the codename stuff adds a little bit of sexyness, in my eyes.
Yeah well Alcohol adds a little bit of sexyness in my eyes, but I dont drink it all the time. :wink:
SpongeBuell wrote:As proof, I offer this picture of a monkey on my head.
64M320N3
Posts: 790
Joined: Wed Apr 16, 2008 5:27 pm
Location: Ft. Collins

Re: Making the xbox DVD drive smaller.... why not?

Post by 64M320N3 »

Sure, 4000 is a bit much.
It's more like 5000 :lol:
No really, there are people who post once or twice saying that they want to do this and buy that, but after a week or so they give up because they realize nobody is going to walk them through it.
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
themadhacker
Senior Member
Posts: 2670
Joined: Wed Aug 06, 2008 7:53 pm
Location: ohio

Re: Making the xbox DVD drive smaller.... why not?

Post by themadhacker »

Yeah, we probably get about ten people a week that post once and never return.

Oh, and DopestKidEva, learn to type.
rest in peace, Ronnie James Dio! \m/
64M320N3
Posts: 790
Joined: Wed Apr 16, 2008 5:27 pm
Location: Ft. Collins

Re: Making the xbox DVD drive smaller.... why not?

Post by 64M320N3 »

Hey, there are people that are worse (cennar :lol: ), but DopestKidEva just uses abbreviations and has no sense of grammar, like he is trying to text somebody...
At least I can understand what he is saying (sort of).
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Post Reply