the Woodie DS

Trying to get homebrew running on your PSP? Want to add a screen light to your Game Boy? Trying to figure out how to work your GP2X? By popular demand, discuss it in here! (This forum is for pre-built handhelds, NOT custom made portables!)

Moderator:Moderators

Post Reply
User avatar
Rekarp
Portablizer Extraordinaire
Posts:2163
Joined:Thu Dec 28, 2006 1:52 am
PSN Username:Lnghrn_
Steam ID:rekarp
Location:Austin, Tx
Contact:
the Woodie DS

Post by Rekarp » Thu Jan 08, 2009 2:33 pm

Image

Yep a stock DS. I don't really play my DS anymore so it has been collecting dust. Decided that I would woodify it.

Image

Couple screws later I got the bottom off.

Image

Bottom of the DS casing. I am going to reuse the stylist holder. Would be impossible to construct out of wood.

Image

Some wires I had to disconnect. This is really a picture for me so I remember where they go :lol:

Image

Opening the top of the DS.

Image

Yep. Nothing much in the top half. Just a LCD, pair a speakers, a mic and a antenna.

Image

The friction hinge. Going to have to figure out how to make this work in wood. I am thinking of some epoxy to fix it in.

Image

All the case parts I am going to have to build out of wood.

Image

Yep, just making sure the DS still works. 8)

Image

The raw mahogany wood. This is 2'x3"x5/8" in size.


Image

Resaw the mahogany into 1/16" sheets.

Image

Profile of the side pieces for the top of the casing.

Image

Pre-sanding is done ready for glue.

Image

And...the boring picture of the wood drying....

I am going to be building this thing part by part. That is finish one part completely so I can eliminate the slight tolerances caused my the lacquer finish.
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."

Kyo
Senior Member
Posts:2470
Joined:Tue Jan 02, 2007 11:59 am
Location:Germany
Contact:

Post by Kyo » Thu Jan 08, 2009 2:38 pm

good to see you're not exposing it to static electricity ;)

This forum is so the proof that the dangers of static electricity are greatly exaggerated. Can't wait to see your progress.

User avatar
Rekarp
Portablizer Extraordinaire
Posts:2163
Joined:Thu Dec 28, 2006 1:52 am
PSN Username:Lnghrn_
Steam ID:rekarp
Location:Austin, Tx
Contact:

Post by Rekarp » Thu Jan 08, 2009 2:43 pm

Kyo wrote:good to see you're not exposing it to static electricity ;)

This forum is so the proof that the dangers of static electricity are greatly exaggerated. Can't wait to see your progress.
Actually its in sitting on a Anti-static mat :P
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."

Kyo
Senior Member
Posts:2470
Joined:Tue Jan 02, 2007 11:59 am
Location:Germany
Contact:

Post by Kyo » Thu Jan 08, 2009 2:47 pm

yeah, but your fingers carelessly touched the mainboard! :O

User avatar
mmoshkowich
Posts:381
Joined:Tue Oct 07, 2008 6:52 pm
PSN Username:mikedacat
Location:Long Island, NY

Post by mmoshkowich » Thu Jan 08, 2009 5:40 pm

This is going to be awesome all of your wooden stuff is epic. Are you going to do the DS logo in wood also? just wondering

User avatar
Rekarp
Portablizer Extraordinaire
Posts:2163
Joined:Thu Dec 28, 2006 1:52 am
PSN Username:Lnghrn_
Steam ID:rekarp
Location:Austin, Tx
Contact:

Post by Rekarp » Thu Jan 08, 2009 5:47 pm

mmoshkowich wrote:This is going to be awesome all of your wooden stuff is epic. Are you going to do the DS logo in wood also? just wondering
Funny you would ask that.

Image

Rough filing of the logo. I am making it out of maple to accent the mahogany top.

Image

Vice and a fine file makes quick work of the extra material.

Image

This one is done.

Image

Comparing how the logo started out and how it finished.

Image

Next to the real thing. Pretty close. Its a little taller so I sanded it down a bit.

Image

I decided to use Super Glue to attach it. I didn't want to clean up the mess Wood Glue makes.

Image

Image

Spraying on the Lacquer.

Image

This won't be the final finish but is needed to keep the wood from warping.
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."

User avatar
palmertech
Senior Member
Posts:3225
Joined:Sat Feb 02, 2008 1:40 am
Location:California, land of the homeless and hippies
Contact:

Post by palmertech » Thu Jan 08, 2009 5:48 pm

If you call pull this off, it will rock.

How much larger will this be than the stock DS case?
Image

Excellent

User avatar
Rekarp
Portablizer Extraordinaire
Posts:2163
Joined:Thu Dec 28, 2006 1:52 am
PSN Username:Lnghrn_
Steam ID:rekarp
Location:Austin, Tx
Contact:

Post by Rekarp » Thu Jan 08, 2009 6:00 pm

palmertech wrote:If you call pull this off, it will rock.

How much larger will this be than the stock DS case?
Same size.
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."

User avatar
Turbo Tax 1.0
Portablizer Extraordinaire
Posts:4773
Joined:Wed Mar 30, 2005 6:19 pm
Location:Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 » Thu Jan 08, 2009 8:01 pm

this is ridiculously awesome. it's looking fantastic already I cant wait to see the finished product
when life gives you lemons make flux
Image
snesp mk4

User avatar
khaag
Senior Member
Posts:2261
Joined:Sat Mar 18, 2006 7:54 pm
Location:C eh N eh D eh
Contact:

Post by khaag » Thu Jan 08, 2009 8:53 pm

This thing is going to be so rad when it's finished. Can't wait to see it done.
[url=http://thekevbot.com]Portfolio[/url]
[url=http://twitter.com/thekevbot]Twitter[/url]
[url=http://blog.thekevbot.com]Blog[/url]

User avatar
Triton
Moderator
Posts:7397
Joined:Mon May 24, 2004 12:33 pm
360 GamerTag:triton199
Steam ID:triton199
Location:Iowa
Contact:

Post by Triton » Fri Jan 09, 2009 6:07 pm

If im the franken-case king you are the wooden-case king :lol: your lucky i dont have woodworking tools or the money to buy wood! :wink:

User avatar
themadhacker
Senior Member
Posts:2670
Joined:Wed Aug 06, 2008 7:53 pm
Location:ohio

Post by themadhacker » Fri Jan 09, 2009 7:13 pm

This is great! What all do you plan on woodifying in the future? A car? (get it, "woodie")
rest in peace, Ronnie James Dio! \m/

Killer_Rabbit
Posts:29
Joined:Sat Oct 06, 2007 1:19 am

Post by Killer_Rabbit » Fri Jan 09, 2009 10:35 pm

Excellent work so far. I'm extra-impressed by the wood logo.

User avatar
grahf
Posts:370
Joined:Fri Jun 23, 2006 7:08 pm
Location:Tokyo Japan
Contact:

Post by grahf » Sat Jan 10, 2009 5:14 am

wow, no f'in way! I never though i'd ever see a wooden DS, but your making one. I can't wait to see the way this comes out. Your work has inspired me to build a wooden cased portable some time in the future.

Kyo
Senior Member
Posts:2470
Joined:Tue Jan 02, 2007 11:59 am
Location:Germany
Contact:

Post by Kyo » Sat Jan 10, 2009 7:31 am

Yeah, the wooden cases of him (and c_mon) always look great. I too want to make a wooden case somewhen. But first I gotta make a case at all, it seems to be the part hindering me the most from actually finishing a portable. (No bacteria, I will not buy your case :P)

Post Reply