Snesp (almost finished)
Moderator:Moderators
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
Good morning, I am new, my name is chris and I am French. Definitely, after this presentation summary let us pass about the post.
I began a snep with the help of the book of ben and by gleaning from there information on the building of a super nes portable.
For now I did not have big problem except with the case which I made by technique FDM fabricate.the case is too flexible because in ABS and it was necessary to reinforce it with plastic cards and the state of surface of the case is not very nice.
Here are some pictures of work in progress.
I began a snep with the help of the book of ben and by gleaning from there information on the building of a super nes portable.
For now I did not have big problem except with the case which I made by technique FDM fabricate.the case is too flexible because in ABS and it was necessary to reinforce it with plastic cards and the state of surface of the case is not very nice.
Here are some pictures of work in progress.
Last edited by darthchris13 on Sun Jan 18, 2009 9:10 am, edited 5 times in total.
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
- bacteria
- Portablizer Extraordinaire
- Posts:3984
- Joined:Fri Apr 20, 2007 12:14 am
- Location:Hampshire, UK
- Contact:
Try and have more of the cart inside the system, looks like you have the room for it. Much better to have a cart enclosed than sticking out too much. Otherwise, looking good so far, and welcome to the forums!
I presume the batteries will fit on the sides of the system, behind the control buttons? (left and right sides)?
I presume the batteries will fit on the sides of the system, behind the control buttons? (left and right sides)?
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
on my first concept the cartridge was absolutely in the console but I had not place anymore for batteries, I did not want a thick console then I took back up the card slot, i made an error of comprehension and the cartridge is not in common sense, to origin they had to see the tab of this one.
Batteries will be in long under the card slot.
Batteries will be in long under the card slot.
- jjhammerstein
- Senior Member
- Posts:1562
- Joined:Tue Nov 18, 2008 7:15 pm
- Location:Southern CT
- Contact:
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
- ShockSlayer
- Niblet 64
- Posts:5059
- Joined:Thu Jun 29, 2006 12:47 pm
- Location:In my inbox.
Read to hard are your posts. Just kidding. I like the cable ties around the wires, keeps everything neat!
SS
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
-
- Posts:123
- Joined:Fri Sep 12, 2008 8:31 am
- Location:marseille, france
- SonyPortableizer
- Portablizer
- Posts:1325
- Joined:Sun Jun 01, 2008 6:49 pm
- Contact:
Très beau travail, comme tu peux le voir je suis aussi français
Nice Work, like you can see I'm also French
J'ai commencé un projet de snesp identique que celui de Brian
I began a snesp project exactly the same of Brian Project
Mais j'arrrive pas à déssouder le port cartouche, je suis débutant avec un fer à souder... J'ai acheté de la tresse mais j'arrive pas à faire fondre la soudure sur la tresse, tu pourrais m'expliquer si y'a une technique ou trucs ??? Merci Tu peux me répondre en MP pour éviter de parler Français sur ce forum anglais
But I can't unsolder the cartwrightport, I am a beginner so do you have some tricks to explain me how I can do this... I bought "braid unsolder" (???) You can send me pm to speak french because it's a public english forum
Merci et encore très beau travail !
Thx and Nice work again !
Nice Work, like you can see I'm also French
J'ai commencé un projet de snesp identique que celui de Brian
I began a snesp project exactly the same of Brian Project
Mais j'arrrive pas à déssouder le port cartouche, je suis débutant avec un fer à souder... J'ai acheté de la tresse mais j'arrive pas à faire fondre la soudure sur la tresse, tu pourrais m'expliquer si y'a une technique ou trucs ??? Merci Tu peux me répondre en MP pour éviter de parler Français sur ce forum anglais
But I can't unsolder the cartwrightport, I am a beginner so do you have some tricks to explain me how I can do this... I bought "braid unsolder" (???) You can send me pm to speak french because it's a public english forum
Merci et encore très beau travail !
Thx and Nice work again !
- Turbo Tax 1.0
- Portablizer Extraordinaire
- Posts:4773
- Joined:Wed Mar 30, 2005 6:19 pm
- Location:Delaware, no sales tax
- Contact: