Hey, making some projects from my book? Got a question about something? Wanna share what you've done? Here's the place - go for it!
Moderator:Moderators
-
vb_master - Moderator
- Posts:4793
- Joined:Tue Jun 08, 2004 9:52 pm
Hip Gear in Ben's CNC NES
Post
by vb_master » Mon Mar 14, 2005 3:55 pm
I am going to build Ben's CNC NES, and was wondering if I could use a Hip Gear screen in it, because I don't feel like spening $100 on the Casio LCD TV.
-
gannon
- Moderator
- Posts:6974
- Joined:Sun Apr 04, 2004 4:48 pm
- Location:Near that one big lake
-
Contact:
Post
by gannon » Mon Mar 14, 2005 4:02 pm
I think the cnc portables in project 42 use a 3.5" lcd. although you probably could use the hip screen pad, it's a 2.5" lcd so you'd need to make a bezel for it. You'd also need to make some custom screwposts to mount it.
-
vb_master - Moderator
- Posts:4793
- Joined:Tue Jun 08, 2004 9:52 pm
Post
by vb_master » Mon Mar 14, 2005 4:05 pm
Actually the Casio is 2.5", so theoretcially, all I need to do is hot-glue it in place.
-
G-force
- Moderator
- Posts:3609
- Joined:Mon Apr 19, 2004 1:43 pm
- Location:Sweet home Indiana
-
Contact:
Post
by G-force » Mon Mar 14, 2005 4:10 pm
Since the hip gear screen is smaller than a normal pocket TV, I see no reason why you couldn't fit it there with space to spare.
-
cennar
- Senior Member
- Posts:2939
- Joined:Wed Jun 02, 2004 7:57 am
- Location:yesterdays brothel, and todays vaccume store
-
Contact:
Post
by cennar » Mon Mar 14, 2005 4:47 pm
yeah why dosnt ben just Every thing you need for a portable: console, screen, PSU, controller.... then we would have no fun. personaly im staying away from that part of the site
-
vb_master - Moderator
- Posts:4793
- Joined:Tue Jun 08, 2004 9:52 pm
Post
by vb_master » Mon Mar 14, 2005 8:16 pm
cennar wrote:yeah why dosnt ben just Every thing you need for a portable: console, screen, PSU, controller.... then we would have no fun. personaly im staying away from that part of the site
Umm, can you please re-type this in a way that actually makes sence.
Oh, BTW, where can I buy a Hip Gear screen?
-
Sparkfist
- Forum Administrator
- Posts:6754
- Joined:Tue Apr 20, 2004 7:12 am
- Location:Michigan
-
Contact:
Post
by Sparkfist » Mon Mar 14, 2005 9:19 pm
The CNC NES used a 3" screen, as the Hip Screens are 2.6" you'll have some area empty.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
I am a geek.
-
vb_master - Moderator
- Posts:4793
- Joined:Tue Jun 08, 2004 9:52 pm
Post
by vb_master » Mon Mar 14, 2005 9:26 pm
How could I fill that in, just some plastic?
-
A.J. Franzman
- Posts:216
- Joined:Mon Jan 17, 2005 11:38 pm
- Location:La-La Land
-
Contact:
Post
by A.J. Franzman » Tue Mar 15, 2005 2:24 am
Sparkfist wrote:The CNC NES used a 3" screen, as the Hip Screens are 2.6" you'll have some area empty.
Hey, I've seen Hip Gear screens referred to as 2.5" and 2.6", but mine actually measures 2.3". This is bogus, since LCD screens are supposed to be measured by actual diagonal size of the viewing area (unlike CRT picture tubes, which go by tube size, and the viewing area may be 1-2 inches less). Does anyone have a Hip Gear Screen Pad with viewable area before disassembly measuring 2.5" or more diagonally?
-
gannon
- Moderator
- Posts:6974
- Joined:Sun Apr 04, 2004 4:48 pm
- Location:Near that one big lake
-
Contact:
Post
by gannon » Tue Mar 15, 2005 8:53 am
I measured the lcd screen to be 2.5" diagonal while it's off. There is some black aroun the edges still when you turn it on, so the image is slightly smaller than 2.5"