Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)
Moderator: Moderators
Jeff
Posts: 1402 Joined: Sun Dec 26, 2004 1:39 pm
Location: Probably banned soon...
Contact:
Post
by Jeff » Sun Mar 13, 2005 8:14 pm
I'm trying to open the controller s, but when I open it it doesn't. Its all unscrewed. What do I do?
PS360Wii Fanboy FTW!
peppers
Senior Member
Posts: 1631 Joined: Sun Oct 24, 2004 11:11 pm
Post
by peppers » Sun Mar 13, 2005 8:16 pm
take out the screws and pull it apart
Im done here
Jeff
Posts: 1402 Joined: Sun Dec 26, 2004 1:39 pm
Location: Probably banned soon...
Contact:
Post
by Jeff » Sun Mar 13, 2005 8:19 pm
Well, other then one which literally wont come out, its good. any tips on getting that one out? I didnt' see it until now XD
PS360Wii Fanboy FTW!
Maniac_Man
Posts: 185 Joined: Wed Feb 02, 2005 4:26 pm
Location: It depends on where you are and if you farted or not
Post
by Maniac_Man » Sun Mar 13, 2005 8:22 pm
needle nose plyers if you dont want to put a hole in ur controller, but just in case you do put a drill in there and start drillin'
Jeff
Posts: 1402 Joined: Sun Dec 26, 2004 1:39 pm
Location: Probably banned soon...
Contact:
Post
by Jeff » Sun Mar 13, 2005 8:39 pm
Maniac_Man wrote: needle nose plyers if you dont want to put a hole in ur controller, but just in case you do put a drill in there and start drillin'
No to pliers, and not allowed to drill.
PS360Wii Fanboy FTW!
peppers
Senior Member
Posts: 1631 Joined: Sun Oct 24, 2004 11:11 pm
Post
by peppers » Sun Mar 13, 2005 8:49 pm
you could aways use the mented pen trick if its not deep enoth so you can reach it with it it also works for striped screws if it ant striped try a screw driver
Im done here
Jeff
Posts: 1402 Joined: Sun Dec 26, 2004 1:39 pm
Location: Probably banned soon...
Contact:
Post
by Jeff » Sun Mar 13, 2005 8:51 pm
peppers wrote: you could aways use the mented pen trick if its not deep enoth so you can reach it with it it also works for striped screws if it ant striped try a screw driver
I have a screwdriver. Its just that this one screw isn't coming up when I turn it.
PS360Wii Fanboy FTW!
peppers
Senior Member
Posts: 1631 Joined: Sun Oct 24, 2004 11:11 pm
Post
by peppers » Sun Mar 13, 2005 8:52 pm
in that case unscrew it all you can and shake and hit it on the opisit side till its out or just unscrew it all you can and lift the case off and it will come with it or unscrew it wile your lifting up on half the case may be nesssasery
Im done here
Black Six
Moderator
Posts: 1991 Joined: Sun Apr 04, 2004 4:34 pm
360 GamerTag: Black 5ix
Location: MD
Post
by Black Six » Sun Mar 13, 2005 9:34 pm
Did you get the screw behind the label? I know there's one there on the original Xbox controller, but I don't know for sure about the S.
"It's not that life's so short, it's just that you're dead for so long." -Anonymous
Threads Closerized: Lost Track, Whoops
peppers
Senior Member
Posts: 1631 Joined: Sun Oct 24, 2004 11:11 pm
Post
by peppers » Sun Mar 13, 2005 9:42 pm
there is not I just opened one an hour ago and there is no screw under the sticker in a original Xbox controller
if you say differint I bet you $50 that there is not one (on original not S)
Im done here
Jeff
Posts: 1402 Joined: Sun Dec 26, 2004 1:39 pm
Location: Probably banned soon...
Contact:
Post
by Jeff » Sun Mar 13, 2005 10:01 pm
I mean on the bottom right if your looking from the back, if it helps.
PS360Wii Fanboy FTW!